WoS İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/394
Browse
53 results
Search Results
Article Citation - WoS: 4Citation - Scopus: 4Very Low Density Amorphous Phase of Zircon(Elsevier Science Bv, 2019-06) Bolat, Suleyman; Durandurdu, MuratUsing a reliable ab initio molecular dynamics method, we investigate the rapid solidification of the zircon melt. Accompanied by amorphization, a drastic volume expansion of 27% is perceived. This value is fairly larger than 18% observed in the metamict zircon. Such a large volume swelling leads to a significant decrease in the mean coordination number of Zr atoms, which is about 5.66 and the lowest one reported so far. On the other hand, the volume expansion is found to have almost no impact on the average coordination number of Si atoms i.e., they maintain their tetragonal coordination. As suggested by earlier investigations, the polymerization of SiO4 units is witnessed but our model shows the highest polymerization with respect to the previous simulations. Based on our findings, we propose that our model does not represent the metamict zircon but a very low density amorphous phase of zircon.Article Citation - WoS: 6Citation - Scopus: 6Uncovering Nanoclusters in Amorphous AlN: An Ab Initio Study(Wiley, 2014-12-22) Durandurdu, MuratAmorphous AlN (a-AlN) is modeled by melt-and-quench technique using ab initio molecular dynamic simulations. For the first time, three-dimensional hexagonal-like nanoclusters embedded in amorphous matrix are proposed for a-AlN. The model is chemically ordered and dominantly fourfold coordinated, but its short-range order is partially different from the crystalline morphology due to the nanoclusters. The model is semiconducting with a theoretical band gap of 1.7eV.Article Citation - WoS: 6Citation - Scopus: 6Two Successive Amorphous-to Phase Transformations in TiO2(Wiley, 2017-05-22) Durandurdu, MuratBased on constant pressure ab initio simulations, we propose, for the first time, two successive amorphous-to-amorphous phase transformations for TiO2. The first one is a gradual phase transformation from a low-density amorphous phase to a high-density amorphous phase, whereas the second one is a first-order phase transformation from the high-density amorphous phase to a very high-density amorphous phase. The low-density amorphous to high-density amorphous phase change is irreversible, whereas the high-density amorphous to very high-density amorphous phase transformation is reversible. The high-density amorphous and very high-density amorphous phases consist of differently coordinated configurations. The sevenfold and ninefold-coordinated arrangements formed in amorphous TiO2 under pressure are similar to the main building motif of the baddeleyite and cotunnite polymorphs of TiO2, respectively, while the eightfold-coordinated configuration is different from the local structure of the cubic TiO2 phase. The electronic structure calculations suggest that both dense amorphous phases present a semiconducting character with a band gap energy less than that of the original low-density amorphous phase.Article Citation - WoS: 3Citation - Scopus: 3Theoretical Investigation of Substituent Effects on the Relative Stabilities and Electronic Structure of [BnXn]2- Clusters(Springer, 2021-11-29) Tahaoglu, Duygu; Alkan, Fahri; Durandurdu, MuratIn this study, we provide a theoretical evaluation of relative stabilities and electronic structure for [BnXn](2-) clusters (n = 10, 12, 13, 14, 15, 16). Structural and electronic characteristics of [BnXn](2-) clusters are examined by comparison with the [B12X12](2-) counterparts with a focus on the substituent effects (X = H, F, Cl, Br, CN, BO, OH, NH2) on the electronic structure, electron detachment energies, formation enthalpies, and charge distributions. For the electronic structure and electron detachment energies, substituent effects on boron clusters are shown to follow a very similar trend to the mesomeric and inductive effects (+/- M and +/- I) of pi-conjugated systems, and the most stable derivatives in terms of HOMO/LUMO and electron detachment energies are calculated for CN and BO substituents due to strong -M effects. In the case of formation enthalpies for larger boron clusters (n >= 13), the icosahedral barrier is shown to increase with the halogen and CN substitution, whereas it is possible to reduce the icosahedral barrier for the cases of X = OH and NH2. It is shown that this reduction results from destabilizing the [B12X12](2-) cluster with electronic (+ M) and symmetry effects induced by OH and NH2 ligands.Article Citation - WoS: 6Citation - Scopus: 6Tetrahedral Amorphous Boron Nitride: A Hard Material(Wiley, 2019-09-25) Durandurdu, MuratWe generate a tetrahedrally coordinated amorphous boron nitride (BN) model by means of first principles molecular dynamics calculations and report its mechanical and electrical properties in detail. The amorphous configuration is almost free from chemical disorder and consists of about 20% coordination defects, similar to tetrahedral (diamond-like) amorphous carbon. Its theoretical band gap energy is about 2.0 eV, less than 4.85 eV estimated for cubic BN. The bulk modulus and Vickers hardness of tetrahedral amorphous BN are computed as 206 GPa and 28-35 GPa, respectively. Based on these findings, we propose that tetrahedral noncrystalline BN can serve as electronic and hard materials as well.Article Citation - WoS: 3Citation - Scopus: 3Stoichiometric Amorphous Boron Carbide (BC)(Springer, 2020-07-17) Yildiz, Tevhide Ayca; Durandurdu, MuratIn this work, a stoichiometric amorphous boron carbide (a-BC) network is constructed via an ab initio molecular dynamics approach. Its structural, electrical and mechanical features are reconnoitered in details and compared with those of turbostratic BC and some important graphite-like amorphous materials. Our computer-generated structure exhibits strong chemical disorder as seen in turbostratic BC. However, it has mixed sp(2) and sp(3) hybridizations and the average coordination number of B and C atoms is projected to be similar to 3.22 and 3.46, correspondingly. Consequently, a-BC appears to be structurally different from turbostratic BC and graphite-like amorphous systems. a-BC is semiconductor having a theoretical band gap of similar to 0.20 eV. The bulk, Young's and shear moduli are estimated as similar to 105, 142 and 56 GPa, respectively. Its Vickers hardness is calculated to be about 7-8.5 GPa. a-BC is anticipated to be electronically and mechanically parallel to amorphous boron carbonitride.Article Citation - WoS: 1Citation - Scopus: 1Solute Aggregation in Ca72Zn28 Metallic Glass(Elsevier Science Bv, 2018-11) Tahaoglu, Duygu; Durandurdu, MuratSolidification of the Ca72Zn28 melt is achieved by using both the thermal quenching and rapid pressurizing techniques in ab initio molecular dynamics simulations within a generalized gradient approximation. A chemical segregation process is perceived in the Ca72Zn28 system and hence the resulting configurations show nanosized glassy domains with different compositions. The structural and mechanical properties of both Ca72Zn28 metallic glasses have been probed by using various analyzing methods. Although the mean coordination number of the both models is found to be fairly close to each other, a careful investigation exposes that they have a different short-range order around Zn atoms. It appears that pressurizing significantly affects the environment of Zn atom, suppresses the occurrence of Zn-centered ideal icosahedral polyhedrons and retains the Zn centered tri-capped trigonal prism like configurations. On the other hand, the impact of pressure on the environment of Ca atoms is found to be not too drastic. The computer-generated models represent slightly different mechanical properties. The model obtained using the rapid pressurizing technique is stiffer than the one produced using the thermal quenching technique.Article Citation - WoS: 29Citation - Scopus: 31Pressure-Induced Amorphization, Mechanical and Electronic Properties of Zeolitic Imidazolate Framework (ZIF-8)(Elsevier Science SA, 2020-01) Erkartal, Mustafa; Durandurdu, MuratAb initio molecular dynamics (AIMD) simulations are carried out to probe the high-pressure behavior of ZIF-8 over wide pressure-range. Under compression, the enormous distortions in the ZnN4 tetrahedral units lead to a crystal-to-amorphous phase transition at around 3 GPa. During the amorphization process, the Zn-N coordination is retained. No other phase change but a possible fracture of the system is proposed above 10 GPa. Depending on released pressures, amorphous states with different densities are recovered. Yet when the applied pressure is released just before the amorphization, the rotations of imidazolate linkers (swing effect) cause an isostructural crystal-to-crystal phase transition, in agreement with experiments. In the tensile regime, no phase transition is perceived up to -2.75 GPa at which point the structural failure is observed. The crystal-amorphous phase transitions are also discovered at around 4 GPa under uniaxial compressions. The amorphous structures formed under uniaxial stress are about 20% denser than the one formed under the hydrostatic pressure. The average Young's modulus and Poisson's ratio of ZIF-8 are estimated to be around 5.6 GPa and 0.4, respectively. Interestingly, the tensile strength of ZIF-8 is found to be about 50% greater than its compressive strength. This paper shows that the experimentally observed phase transitions can be successfully reproduced with a clear explanation about the transition mechanism(s) at the atomistic level and all mechanical properties can be accurately calculated for a given ZIF structure by using AIMD simulations.Article Citation - WoS: 1Citation - Scopus: 1Pressure-Induced Phase Transformations in Amorphous Arsenic(Elsevier Science Bv, 2016-04) Durandurdu, MuratThe atomic structure of amorphous arsenic and its response to high pressure are explored using a constant pressure ab initio molecular dynamics technique. Different analyzing techniques reveal that amorphous arsenic has a local structure close to that of the crystalline phase. The model also presents some twofold and fourfold coordination defects. The existence of a possible amorphous to amorphous phase transition for arsenic is proposed on the bases of the observation of a gradual coordination increase with the application of pressure. Further compression of the amorphous state yields a transformation into a simple cubic crystal. (C) 2016 Elsevier B.V. All rights reserved.Article Pressure-Driven Structural Evolution of Amorphous InN(Elsevier, 2025-02) Durandurdu, MuratThrough constant-pressure ab initio simulations, we have uncovered high-pressure phase transformations in amorphous indium nitride for the first time. Our results reveal a distinct two-step progression under compression. Initially, a polyamorphic transition occurs, where the low-density amorphous (LDA) phase transforms into a high-density amorphous (HDA) phase. This HDA structure remains stable in some pressure range and then crystallization initiates, leading to a rocksalt configuration. Upon decompression, the HDA phase reverts to an amorphous network with a slightly higher density and coordination number than the initial LDA state.