WoS İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/394
Browse
6 results
Search Results
Article Citation - WoS: 29Citation - Scopus: 32Wind Farm Site Selection Using GIS-Based Multicriteria Analysis With Life Cycle Assessment Integration(Springer Heidelberg, 2024-01-19) Demir, Abdullah; Dincer, Ali Ersin; Ciftci, Cihan; Gulcimen, Sedat; Uzal, Nigmet; Yilmaz, KutayThe sustainability of wind power plants depends on the selection of suitable installation locations, which should consider not only economic and technical factors including manufacturing and raw materials, but also issues pertaining to the environment. In the present study, a novel methodology is proposed to determine the suitable locations for wind turbine farms by analyzing from the environmental perspective. In the methodology, the life cycle assessment (LCA) of wind turbines is incorporated into the decision process. The criteria are ranked using analytical hierarchy process (AHP). The study area is chosen as the western region of Turkiye. The obtained suitability map reveals that wind speed is not the sole criterion for selecting a site for wind turbine farms; other factors, such as bird migration paths, distance from urban areas and land use, are also crucial. The results also reveal that constructing wind power plants in the vicinity of Izmir, canakkale, Istanbul, and Balikesir in Turkiye can lead to a reduction in emissions. Izmir and its surrounding area show the best environmental performance with the lowest CO2 per kilowatt-hour (7.14 g CO2 eq/kWh), to install a wind turbine due to its proximity to the harbor and steel factory across the study area. canakkale and the northwest region of Turkiye, despite having high wind speeds, are less environmentally favorable than Izmir, Balikesir, and Istanbul. The findings of LCA reveal that the nacelle and rotor components of the wind turbine contribute significantly (43-97%) to the environmental impact categories studied, while the tower component (0-36%) also has an impact.Article Citation - WoS: 14Citation - Scopus: 15The Impact of Kahramanmaraş (2023) Earthquakes: A Comparative Case Study for Adıyaman and Malatya(Elsevier, 2024-08) Dincer, Ali Ersin; Dincer, N. Nergiz; Tekin-Koru, Ayca; Yasar, Burze; Yilmaz, ZaferThis study examines the effects of two major earthquakes of magnitude 7.7 and 7.6 that struck Kahramanmara & scedil; on February 6th, 2023, followed by a magnitude 6.4 quake in Hatay on February 20th, which caused major damage in 11 Turkish provinces. The study focuses on Ad & imath;yaman and Malatya and uses an interdisciplinary approach to analyze the economic and environmental impacts. Primary data sources, including field visits and interviews, reveal clear labor-related challenges in both provinces, characterized by a government-induced labor shortage. In both provinces, physical capital has been severely damaged, particularly affecting small businesses, historic bazaars, and old industrial areas. The impact on businesses varies by size and location, with Ad & imath;yaman suffering more severe setbacks than other cities. The shortage of skilled labor related to the earthquake damage affects the quality of production, which can have a serious economic impact. Transportation disruptions continue to hamper supply chains and affect companies' ability to meet their export commitments. The environmental consequences, particularly the large amount of debris, pose a major challenge. The lack of a comprehensive disaster waste plan at the central government level leads to inadequate waste management. The study recommends sorting the debris at temporary sites to obtain reusable items while paying attention to the sustainability and transparency of debris management processes. In summary, this comparative case study highlights the need for tailored approaches to address the different impacts in the 11 provinces. A one-size-fits-all solution is insufficient and an individual needs assessment is needed for each province in order to implement targeted economic and environmental recovery measures.Article Citation - WoS: 12Citation - Scopus: 12Numerical and Experimental Investigation of Sloshing in a Water Tank With a Fully Coupled Fluid-Structure Interaction Method(Inderscience Enterprises Ltd, 2021) Demir, Abdullah; Dincer, Ali Ersin; Ozturk, Sevki; Kazaz, IlkerIn the present study, the harmonic movement of fluid flow and the behaviour of elastic structure under this movement are investigated. Accordingly, a recently developed fluid-structure interaction method in which fluid and structure are simulated with smoothed particle hydrodynamics (SPH) and finite element method (FEM) is used. The interaction between fluid and the structure is satisfied with the contact mechanics. In order to validate the numerical model under harmonic movement, different experiments are used. First, the structure is assumed to be rigid and the pressures calculated on the structure are compared with the experimental data available in the literature. Similarly, free-surfaces are also validated with novel experiments carried out in the context of this study. In addition, the interaction between an elastic structure and fluid is investigated in the novel experiments in which a water tank having an elastic buffer in the middle is moved under harmonic horizontal movement and the deflection of the elastic buffer and free-surface profiles are measured. Comprehensive results are given for all validation cases. According to the results, the numerical method is successful and can be used in these types of problems.Article Citation - WoS: 23Citation - Scopus: 28Exploring Flood and Erosion Risk Indices for Optimal Solar PV Site Selection and Assessing the Influence of Topographic Resolution(Pergamon-Elsevier Science Ltd, 2023-11) Yilmaz, Kutay; Dincer, Ali Ersin; Ayhan, Elif N.This study explores the suitability of Mentes,e Region in Turkiye for the installation of solar PV farms, given the significant increase in energy demand in the country and the need to reduce reliance on fossil fuels. The Analytical Hierarchy Process (AHP) method, which has been widely used in previous studies, is employed to identify the most influential criteria for site selection, including environmental, economic, and social factors. However, this study introduces two new factors, flood hazard and erosion indices, to the analysis, which are crucial in areas susceptible to these hazards. The results show that approximately 7.5% of the study surface area is suitable for solar PV production. The study reveals that flood hazard and erosion indices have an effect on the suitable sites despite their relatively lower weights in the AHP. In addition, the study illustrates that site selection can be carried out using topographic data of lower resolution, as long as the data is resampled to match the resolution of land use data. The study is novel in its integration of flood and erosion risk indices in the decision process and its investigation of the influence of topographic resolution on site selection for solar PV panels.Article Citation - WoS: 62Citation - Scopus: 63A Novel Method for the Site Selection of Large-Scale PV Farms by Using AHP and GIS: A Case Study in Izmir, Turkiye(Pergamon-Elsevier Science Ltd, 2023-07) Demir, Abdullah; Dincer, Ali Ersin; Yilmaz, KutayEffective and sustainable climate-friendly policies to reduce carbon dioxide emissions in line with the 2020 European Green Deal are necessary. Accordingly, renewable energies assumed a critical role, rendering the site selection of these systems very crucial. The present study proposes a novel approach to the site selection of large-scale photovoltaic (PV) plants using a combination of analytic hierarchy process (AHP) and geographic infor-mation system (GIS). In the study, the weights of criteria used for selecting solar PV panels are adjusted according to the installed capacity of the PV plant. The land of cost is included as a criterion in the AHP for the first time in PV plant site selection. Besides, a novel method called optimality-based site growing (OBSG) is introduced to further analyze the suitable sites obtained from GIS simulations and to determine the most suitable locations of PV farms. The proposed method is demonstrated with a case study of Turkiye, and the results show that the method effectively determines the most suitable locations for large-scale PV plants.Article Citation - WoS: 3Citation - Scopus: 3A Cleaner Demolition Scheduling Methodology Considering Dust Dispersion: A Case Study for a Post-Earthquake Region(Elsevier Sci Ltd, 2024-11) Dincer, Ali Ersin; Demir, Abdullah; Dilmen, OmerIn the present century, pollution is a primary concern for billions, prompting governments to advocate cleaner ways of production. Demolition activity is often an indispensable solution for structures that have completed their economic life. However, there are no regulations for the scheduling of demolition, except those related to the method of demolition and ensuring worker safety. Older buildings incorporate hazardous materials, such as asbestos, silica, and lead. These materials not only carry inherent risks, but high levels of aerosols in the air also adversely affect health. In this study, a demolition scheduling method is proposed, considering the dust dispersion. This research is pioneering, providing a structured demolition schedule to minimize the impact on both humans and the environment. In the methodology, a dispersion model is used to calculate the region exposed to dust and the concentration distribution throughout that area. In addition to the dust effect map, a vulnerability map is created using Analytical Hierarchy Process (AHP), aiding in determining interrelations between vulnerable sites. Thus, the dust effect map is derived by considering both dust exposure and the vulnerability map. The region affected by dust and the concentration of dust vary based on wind characteristics. By knowing the dust effect maps for the site (or all subsites) during specified time periods, a schedule can be defined. As a case study, schedules causing the absolute minimum and optimum dust effect rates are established for Kahramanmaras,, , , T & uuml;rkiye which recently experienced a devastating earthquake. The findings of the case study show that the dust effect on humans and the environment is significantly reduced. Consequently, by adhering to the proposed scheduling plan, human exposure to demolition dust is minimized, resulting in reduced medical expenses even without increasing the cost of the demolition.