WoS İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/394
Browse
4 results
Search Results
Article Citation - WoS: 12Citation - Scopus: 11Trans-Cis Isomerization Assisted Synthesis of Solution-Processable Yellow Fluorescent Maleic Anhydrides for White-Light Generation(Elsevier Science SA, 2015-12) Ozdemir, Mehmet; Genc, Sinan; Ozdemir, Resul; Altintas, Yemliha; Citir, Murat; Sen, Unal; Usta, HakanHeterocyclic maleic anhydride derivatives have been extensively studied in natural products chemistry over the past few decades. However, their incorporation into optoelectronic devices has lagged behind that of other pi-conjugated systems, and they have never been studied in white light emitting diodes (WLEDs). The development of emissive pi-conjugated materials for (WLEDs) has been an emerging scientific and technological research area to replace phosphors used in LED-based solid-state lighting. Here, we demonstrate the design, synthesis and characterization of two new highly emissive alkyl-substituted bis(thienyl)maleic anhydrides (C6-Th2MA and C12-Th2MA) with favorable photophysical properties. The new core is synthesized via a novel trans-to-cis isomerization-assisted one-pot reaction, which is demonstrated for the first time in the literature for the synthesis of a bis(heteroaryl)maleic anhydride. Due to its favorable absorption and fluorescence properties in the blue and yellow region of the visible spectrum, respectively, C12-Th2MA is studied as a potential wavelength-upconverting material. A WLED fabricated by drop-casting a polymeric solution of C12-Th2MA on a blue LED (InGaN, 455 nm) yields promising CIE coordinates and color-rendering index (CRI) values of (0.24, 0.20) and 65.0, respectively. Considering the simplicity of the current molecular structure and facile synthesis, alkyl-substituted bis(thienyl)maleic anhydrides stand as ideal phosphor alternatives. Therefore, the current findings may open new perspectives for the development of maleic anhydride-based small molecules for low-cost, energy-efficient, and solution-processed lighting technologies. (C) 2015 Elsevier B.V. All rights reserved.Article Citation - WoS: 25Citation - Scopus: 27Selective Removal of Cationic Micro-Pollutants Using Disulfide-Linked Network Structures(Royal Soc Chemistry, 2017) Atas, Mehmet Sahin; Dursun, Sami; Akyildiz, Hasan; Citir, Murat; Yavuz, Cafer T.; Yavuz, Mustafa SelmanMicropollutants are found in all water sources, even after thorough treatments that include membrane filtration. New ones emerge as complex molecules are continuously produced and discarded after used. Treatment methods and sorbent designs are mainly based on non-specific interactions and, therefore, have been elusive. Here, we developed swellable covalent organic polymers (COP) with great affinity towards micropollutants, such as textile industry dyes. Surprisingly, only cationic dyes in aqueous solution were selectively and completely removed. Studies of the COPs surfaces led to a gating capture, where negatively charged layer attracts cationic dyes and moves them inside the swollen gel through diffusive and hydrophobic interaction of the hydrocarbon fragments. Despite its larger molecular size, crystal violet has been taken the most, 13.4 mg g(-1), surpassing all competing sorbents. The maximum adsorption capacity increased from 12.4 to 14.6 mg and from 8.9 to 11.4 mg when the temperature of dye solution was increased from 20 to 70 degrees C. The results indicated that disulfide-linked COPs are attractive candidates for selectively eliminating cationic dyes from industrial wastewater due to exceptional swelling behaviour, low-cost and easy synthesis.Article Citation - WoS: 104Citation - Scopus: 109Proton Conducting Poly(Vinyl Alcohol) (PVA)/Poly (2-Acrylamido Sulfonic Acid) (PAMPS)/Zeolitic Imidazolate Framework (ZIF) Ternary Composite Membrane(Elsevier, 2016-02) Erkartal, Mustafa; Usta, Hakan; Citir, Murat; Sen, UnalThe design, synthesis and characterization of novel proton exchange membranes (PEMs) are of significant scientific and technological importance for the realization of fuel cells, actuators, and sensors. Here, we demonstrate a novel ternary composite membrane consisting of poly(vinyl alcohol) (PVA), poly (2-acrylamido-2-methylpropane sulfonic acid) (PAMPS), zeolitic imidazolate framework-8 (ZIF-8), which is prepared by physical blending and casting methods. To enhance the water management of the membranes, in situ chemical cross-linking is carried out by glutaraldehyde (GA). During the characterization of the new membranes, FT-IR is used for intermolecular and inter-polymer interactions between different components of the membrane, SEM is used to identify morphology, XRD is used to prove the presence of ZIF-8 nanoparticles, and finally TGA is used for thermal stability. The proton conductivity of the membranes is found to increase with temperature and also with the increasing content of PAMPS. The highest proton conductivity under fully hydrated state at 80 degrees C is measured as 0.134 S cm(-1) for PVA: PAMPS: ZIF-8 (55:40:5) composition. In this study, it is clearly shown that ZIF-8 nanoparticles contribute to the proton conductivity by forming hydrogen bonds with the polymer network in the membrane. The water uptake (WU) and ion exchange capacity (IEC) values are 3.28 (gig) and 1.52 meq g(-1), respectively for the same membrane. To the best our knowledge, this study shows one of the first example of a MOFcontaining membrane with truly high proton conductivities, and both values of proton conductivity and electrochemical properties are comparable to those of well-studied membrane, Nation. (C) 2015 Elsevier B.V. All rights reserved.Conference Object Citation - WoS: 15Citation - Scopus: 16Development of Highly Transparent Pd-Coated Ag Nanowire Electrode for Display and Catalysis Applications(Elsevier Science Bv, 2015-09) Canlier, Ali; Ucak, Umit Volkan; Usta, Hakan; Cho, Changsoon; Lee, Jung-Yong; Sen, Unal; Citir, MuratAg nanowire transparent electrode has excellent transmittance (90%) and sheet resistance (20 Omega/sq), yet there are slight drawbacks such as optical haze and chemical instability against aerial oxidation. Chemical stability of Ag nanowires needs to be improved in order for it to be suitable for electrode applications. In our recent article, we demonstrated that coating Ag nanowires with a thin layer of Au through galvanic exchange reactions enhances the chemical stability of Ag nanowire films highly and also helps to obtain lower haze. In this study, coating of a thin Pd layer has been applied successfully onto the surface of Ag nanowires. A mild Pd complex oxidant [Pd(en)(2)](NO3)(2) was prepared in order to oxidize Ag atoms partially on the surface via galvanic displacement. The mild galvanic exchange allowed for a thin layer (1-2 nm) of Pd coating on the Ag nanowires with minimal truncation of the nanowire, where the average length and the diameter were 12.5 mu m and 59 nm, respectively. The Pd-coated Ag nanowires were suspended in methanol and then electrostatically sprayed on flexible polycarbonate substrates. It has been revealed that average total transmittance remain around 95% within visible spectrum region (400-800 nm) whereas sheet resistance rises up to 175 Omega/sq. To the best of our knowledge, for the first time in the literature, Pd coating was employed on Ag nanowires in order to design transparent electrodes for high transparency and strong chemical resistivity against nanowire oxidation. The current Pd-coated Ag nanowires may render an excellent catalyst system for fuel cell applications, as well as in organic synthesis with relatively low costs since our approach enables the fabrication of these nanowires with a very thin layer of Pd. We believe that mesh form of Pd-coated Ag nanowires will coin a new catalyst concept to the related areas since their sheet conductivity is high enough, and also little amount of Pd displays a large surface area as thin layers. (C) 2015 Elsevier B.V. All rights reserved.