PubMed İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/397
Browse
17 results
Search Results
Article Citation - WoS: 28Citation - Scopus: 29Three-Dimensional Au-Coated Electrosprayed Nanostructured BODIPY Films on Aluminum Foil as Surface-Enhanced Raman Scattering Platforms and Their Catalytic Applications(Amer Chemical Soc, 2017-05-16) Yilmaz, Mehmet; Erkartal, Mustafa; Ozdemir, Mehmet; Sen, Unal; Usta, Hakan; Demirel, GokhanThe design and development of three-dimensional (3D) nanostructures with high surface-enhanced Raman scattering (SERS) performances have attracted considerable attention in the fields of chemistry, biology, and materials science. Nevertheless, electrospraying of organic smalt molecules on low-cost flexible substrates has never been studied to realize large-scale SERS-active platforms. Here, we report the facile, efficient, and low-cost fabrication of-Stable and reproducible Au-coated electrosprayed organic semiconductor films (Au@BDY-4TEBDY) on flexible regular aluminum foil at a large scale (5 cm X 5 cm) for practical SERS and catalytic applications. To this end, a well-designed-acceptor-donor-atceptor-type solution-processable molecular semiconductor, BDY-4T-BDY, developed by our group, is used because of its advantageous structural and electrical properties. The morphology of the electrosprayed organic film changes by solution concentration, and two different 3D morphologies with out-of-plane features are obtained. Highly uniform dendritic nanoribbons with sharp needle-like tips and vertically oriented nanoplates (similar to 50 nm thickness) are achieved when electrospraying solution concentrations of 240 and 253% w/v.(mgimL) are, respectively, used. When these electrosprayed organic films are coated with a nanoscopic thin (30 nm) Au layer, the resulting Au@BDY-4T-BDY platforms demonstrate remarkable SERS enhancement factors up to 1.7 X 10(6) with excellent Raman signal reproducibility (relative standard deviation <= 0.13) for methylene blue over the entire film. Finally, Au@BDY-4T-BDY films showed good catalytic activity for the reduction of 4-nitrophenol to 4-aminophenol with rate constants of 1.3 X 10(-2) and 9.2 X 10(-3) min(-1). Our results suggest that electrospraying of rationally designed organic semiconductor molecules on flexible substrates holds great promise to enable low-cost, solution-processed, SERS-active platforms.Article Citation - WoS: 53Citation - Scopus: 59Thickness-Tunable Self-Assembled Colloidal Nanoplatelet Films Enable Ultrathin Optical Gain Media(Amer Chemical Soc, 2020-07-31) Erdem, Onur; Foroutan, Sina; Gheshlaghi, Negar; Guzelturk, Burak; Altintas, Yemliha; Demir, Hilmi VolkanWe propose and demonstrate construction of highly uniform, multilayered superstructures of CdSe/CdZnS core/shell colloidal nanoplatelets (NPLs) using liquid interface self-assembly. These NPLs are sequentially deposited onto a solid substrate into slabs having monolayer-precise thickness across tens of cm(2) areas. Because of near-unity surface coverage and excellent uniformity, amplified spontaneous emission (ASE) is observed from an uncharacteristically thin film having 6 NPL layers, corresponding to a mere 42 nm thickness. Furthermore, systematic studies on optical gain of these NPL superstructures having thicknesses ranging from 6 to 15 layers revealed the gradual reduction in gain threshold with increasing number of layers, along with a continuous spectral shift of the ASE peak (similar to 18 nm). These observations can be explained by the change in the optical mode confinement factor with the NPL waveguide thickness and propagation wavelength. This bottom-up construction technique for thickness-tunable, three-dimensional NPL superstructures can be used for large-area device fabrication.Article Citation - WoS: 61Citation - Scopus: 74Solution-Processable Bodipy-Based Small Molecules for Semiconducting Microfibers in Organic Thin-Film Transistors(Amer Chemical Soc, 2016-05-23) Ozdemir, Mehmet; Choi, Donghee; Kwon, Guhyun; Zorlu, Yunus; Cosut, Bunyemin; Kim, Hyekyoung; Usta, HakanElectron-deficient pi-conjugated small molecules can function as electron-transporting semiconductors in various optoelectronic applications. Despite their unique structural, optical, and electronic properties, the development of BODIPY-based organic semiconductors has lagged behind that of other pi-deficient units. Here, we report the design and synthesis of two novel solution-proccessable BODIPY-based small molecules (BDY-3T-BDY and BDY-4T-BDY) for organic thin-film transistors (OTFTs). The new semiconductors were fully characterized by H-1/C-13 NMR, mass spectrometry, cyclic voltammetry, UV-vis spectroscopy, photoluminescence, differential scanning calorimetry, and thermogravimetric analysis. The single-crystal X-ray diffraction (XRD) characterization of a key intermediate reveals crucial structural properties. Solution-sheared top-contact/bottom-gate OTFTs exhibited electron mobilities up to 0.01 cm(2)/V center dot s and current on/off ratios of >10(8). Film microstructural and morphological characterizations indicate the formation of relatively long (similar to 0.1 mm) and micrometer-sized (1-2 mu m) crystalline fibers for BDY-4T-BDY-based films along the shearing direction. Fiber-alignment-induced charge-transport anisotropy (mu?/mu approximate to 10) was observed, and higher mobilities were achieved when the microfibers were aligned along the conduction channel, which allows for efficient long-range charge-transport between source and drain electrodes. These OTFT performances are the highest reported to date for a BODIPY-based molecular semiconductor, and demonstrate that BODIPY is a promising building block for enabling solution-processed, electron-transporting semiconductor films.Article Citation - WoS: 11Citation - Scopus: 13Solution-Processable Indenofluorenes on Polymer Brush Interlayer: Remarkable N-Channel Field-Effect Transistor Characteristics Under Ambient Conditions(Amer Chemical Soc, 2023-08-15) Can, Ayse; Deneme, Ibrahim; Demirel, Gokhan; Usta, HakanThe development of solution-processable n-type molecularsemiconductorsthat exhibit high electron mobility (& mu;(e) & GE;0.5 cm(2)/(V & BULL;s)) under ambient conditions, along withhigh current modulation (I (on)/I (off) & GE; 10(6)-10(7)) andnear-zero turn on voltage (V (on)) characteristics,has lagged behind that of other semiconductors in organic field-effecttransistors (OFETs). Here, we report the design, synthesis, physicochemicaland optoelectronic characterizations, and OFET performances of a libraryof solution-processable, low-LUMO (-4.20 eV) 2,2 & PRIME;-(2,8-bis(3-alkylthiophen-2-yl)indeno[1,2-b]fluorene-6,12-diylidene)dimalononitrile small molecules, & beta;,& beta;& PRIME;-C (n) -TIFDMTs, having varied alkyl chain lengths (n = 8, 12, 16). An intriguing correlation is identifiedbetween the solid-isotropic liquid transition enthalpies andthe solubilities, indicating that cohesive energetics, which are tunedby alkyl chains, play a pivotal role in determining solubility. Thesemiconductors were spin-coated under ambient conditions on denselypacked (grafting densities of 0.19-0.45 chains/nm(2)) ultrathin (& SIM;3.6-6.6 nm) polystyrene-brush surfaces.It is demonstrated that, on this polymer interlayer, thermally induceddispersive interactions occurring over a large number of methyleneunits between flexible alkyl chains (i.e., zipper effect) are criticalto achieve a favorable thin-film crystallization with a proper microstructureand morphology for efficient charge transport. While C-8 and C-16 chains show a minimal zipper effect upon thermalannealing, C-12 chains undergo an extended interdigitationinvolving & SIM;6 methylene units. This results in the formationof large crystallites having lamellar stacking ((100) coherence length & SIM;30 nm) in the out-of-plane direction and highly favorablein-plane & pi;-interactions in a slipped-stacked arrangement. Uninterruptedmicrostructural integrity (i.e., no face-on (010)-oriented crystallites)was found to be critical to achieving high mobilities. The excellentcrystallinity of the C-12-substituted semiconductor thinfilm was also evident in the observed crystal lattice vibrations (phonons)at 58 cm(-1) in low-frequency Raman scattering. Two-dimensionalmicrometer-sized (& SIM;1-3 & mu;m), sharp-edged plate-likegrains lying parallel with the substrate plane were observed. OFETsfabricated by the current small molecules showed excellent n-channelbehavior in ambient with & mu;(e) values reaching & SIM;0.9cm(2)/(V & BULL;s), I (on)/I (off) & SIM; 10(7)-10(8), and V (on) & AP; 0 V. Our study notonly demonstrates one of the highest performing n-channel OFET devicesreported under ambient conditions via solution processing but alsoelucidates significant relationships among chemical structures, molecularproperties, self-assembly from solution into a thin film, and semiconductingthin-film properties. The design rationales presented herein may openup new avenues for the development of high-electron-mobility novelelectron-deficient indenofluorene and short-axis substituted donor-acceptor & pi;-architectures via alkyl chain engineering and interface engineering.Article Citation - WoS: 25Citation - Scopus: 25Self-Resonant Microlasers of Colloidal Quantum Wells Constructed by Direct Deep Patterning(Amer Chemical Soc, 2021-05-24) Gheshlaghi, Negar; Foroutan-Barenji, Sina; Erdem, Onur; Altintas, Yemliha; Shabani, Farzan; Humayun, Muhammad Hamza; Demir, Hilmi VolkanHere, the first account of self-resonant fully colloidal mu-lasers made from colloidal quantum well (CQW) solution is reported. A deep patterning technique is developed to fabricate well-defined high aspect-ratio on-chip CQW resonators made of grating waveguides and in-plane reflectors. The fabricated waveguide-coupled laser, enabling tight optical confinement, assures in-plane lasing. CQWs of the patterned layers are closed-packed with sharp edges and residual-free lifted-off surfaces. Additionally, the method is successfully applied to various nanoparticles including colloidal quantum dots and metal nanoparticles. It is observed that the patterning process does not affect the nanocrystals (NCs) immobilized in the attained patterns and the different physical and chemical properties of the NCs remain pristine. Thanks to the deep patterning capability of the proposed method, patterns of NCs with subwavelength lateral feature sizes and micron-scale heights can possibly be fabricated in high aspect ratios.Article Citation - WoS: 54Citation - Scopus: 58Proton Conducting Self-Assembled Metal-Organic Framework/Polyelectrolyte Hollow Hybrid Nanostructures(Amer Chemical Soc, 2016-08-29) Sen, Unal; Erkartal, Mustafa; Kung, Chung-Wei; Ramani, Vijay; Hupp, Joseph T.; Farha, Omar K.Herein, a room temperature chemical process to synthesize functional, hollow nanostructures from zeolitic imidazolate framework-8 (ZIF-8) and poly(vinylphosphonic acid) (PVPA) is reported. Syntheses are initiated by physically blending the components a process that is accompanied first by encapsulation of ZIF-8 crystallites by PVPA and then by fragmentation of the crystallites. The fragmentation process is driven by partial displacement of the methyl-imidazolate ligands of Zn(II) in ZIF-8 by phosphonate groups on PVPA. Differences in rates of diffusion for the components of the reactive mixture yield a Kirkendall-like effect that is expressed as a hollow-particle morphology. The obtained hollow nanostructures feature hybrid shells containing PVPA, ZIF-8, and their cross-reacted products. The hybrid structures display substantial proton conductivities that increase with increasing temperature, even under the anhydrous conditions prevailing at temperatures above the boiling point of water. For example, at T = 413 K the proton conductivity of ZIF-8@PVPA reaches 3.2 (+/- 0.12) x 10(-3) S cm(-1), a value comparatively higher than that for PVPA (or ZIF-8) in isolation. The high value may reflect the availability in the hybrid structures of free (and partially free), amphoteric imidazole species, and their hydrogen-bonding interactions with phosphonate and/or phosphonic acid units. The persistence of ample conductivity at high temperature reflects the elimination of phosphonic acid group dehydration and dimerization-an effect that strikingly degrades the conductivity of pure PVPA under anhydrous conditions.Article Citation - WoS: 51Citation - Scopus: 56Machine Learning-Aided Inverse Design and Discovery of Novel Polymeric Materials for Membrane Separation(Amer Chemical Soc, 2024-12-16) Dangayach, Raghav; Jeong, Nohyeong; Demirel, Elif; Uzal, Nigmet; Fung, Victor; Chen, YongshengPolymeric membranes have been widely used for liquid and gas separation in various industrial applications over the past few decades because of their exceptional versatility and high tunability. Traditional trial-and-error methods for material synthesis are inadequate to meet the growing demands for high-performance membranes. Machine learning (ML) has demonstrated huge potential to accelerate design and discovery of membrane materials. In this review, we cover strengths and weaknesses of the traditional methods, followed by a discussion on the emergence of ML for developing advanced polymeric membranes. We describe methodologies for data collection, data preparation, the commonly used ML models, and the explainable artificial intelligence (XAI) tools implemented in membrane research. Furthermore, we explain the experimental and computational validation steps to verify the results provided by these ML models. Subsequently, we showcase successful case studies of polymeric membranes and emphasize inverse design methodology within a ML-driven structured framework. Finally, we conclude by highlighting the recent progress, challenges, and future research directions to advance ML research for next generation polymeric membranes. With this review, we aim to provide a comprehensive guideline to researchers, scientists, and engineers assisting in the implementation of ML to membrane research and to accelerate the membrane design and material discovery process.Article Citation - WoS: 67Citation - Scopus: 74Highly Transparent Au-Coated Ag Nanowire Transparent Electrode With Reduction in Haze(Amer Chemical Soc, 2014-08-07) Kim, Taegeon; Canlier, Ali; Cho, Changsoon; Rozyyev, Vepa; Lee, Jung-Yong; Han, Seung MinAg nanowire transparent electrode has excellent transmittance and sheet resistance, yet its optical haze still needs to be improved in order for it to be suitable for display applications. Ag nanowires are known to have high haze because of the geometry of the nanowire and the high light scattering characteristic of the Ag. In this study, a Au-coated Ag nanowire structure was proposed to reduce the haze, where a thin layer of Au was coated on the surface of the Ag nanowires using a mild [Au(en)(2)]Cl-3 galvanic displacement reaction. The mild galvanic exchange allowed for a thin layer of Au coating on the Ag nanowires with minimal truncation of the nanowire, where the average length and the diameter were 13.0 mu m and 60 nm, respectively. The Au-coated Ag nanowires were suspended in methanol and then electrostatically sprayed on a flexible polycarbonate substrate that revealed a clear reduction in haze with a 2-4% increase in total transmittance, sheet resistance ranges of 80-90%, and 8.8-36.8 Ohm/sq. Finite difference time domain simulations were conducted for Au-coated Ag nanowires that indicated a significant reduction in the average scattering from 1 to 0.69 fo Au layer thicknesses of 0-10 nm.Article Citation - WoS: 63Citation - Scopus: 63Highly Efficient Deep-Blue Electroluminescence Based on a Solution-Processable A-Π Oligo(p-Phenyleneethynylene) Small Molecule(Amer Chemical Soc, 2019-10-14) Usta, Hakan; Alimli, Dilek; Ozdemir, Resul; Dabak, Salih; Zorlu, Yunus; Alkan, Fahri; Can, AyseThe development of solution-processable fluorescent small molecules with highly efficient deep-blue electroluminescence is of growing interest for organic light-emitting diode (OLED) applications. However, high-performance deep-blue fluorescent emitters with external quantum efficiencies (EQEs) over 5% are still scarce in OLEDs. Herein, a novel highly soluble oligo(p-phenyleneethynylene)-based small molecule, 1,4-bis((2-cyanophenyl)ethynyl)-2,5-bis(2-ethylhexyloxy)benzene (2EHO-CNPE), is designed, synthesized, and fully characterized as a wide band gap (2.98 eV) and highly fluorescent (Phi(PL) = 0.90 (solution) and 0.51 (solid-state)) deep-blue emitter. The new molecule is functionalized with cyano (-CN)/2-ethylhexyloxy (-OCH2CH(C2H5)C4H9) electron-withdrawing/-donating substituents, and ethynylene is used as a pi-spacer to form an acceptor (A)-pi-donor (D)-pi-acceptor (A) molecular architecture with hybridized local and charge transfer (HLCT) excited states. Physicochemical and optoelectronic characterizations of the new emitter were performed in detail, and the single-crystal structure was determined. The new molecule adopts a nearly coplanar pi-conjugated framework packed via intermolecular "C-H center dot center dot center dot pi" and "C-H center dot center dot center dot N" hydrogen bonding interactions without any pi-pi stacking. The OLED device based on 2EHO-CNPE shows an EQE(max) of 7.06% (EQE = 6.30% at 200 cd/m(2)) and a maximum current efficiency (CEmax) of 5.91 cd/A (CE = 5.34 cd/A at 200 cd/m(2)) with a deep-blue emission at CIE of (0.15, 0.09). The electroluminescence performances achieved here are among the highest reported to date for a solution-processed deep-blue fluorescent small molecule, and, to the best of our knowledge, it is the first time that a deep-blue OLED is reported based on the oligo(p-phenyleneethynylene) pi-framework. TDDFT calculations point to facile reverse intersystem crossing (RISC) processes in 2EHO-CNPE from high-lying triplet states to the first singlet excited state (T-2/T-3 -> S-1) (hot-exciton channels) that enable a high radiative exciton yield (eta(r) similar to 69%) breaking the theoretical limit of 25% in conventional fluorescent OLEDs. These results demonstrate that properly designed fluorescent oligo(p-phenyleneethynylenes) can be a key player in high-performance deep-blue OLEDs.Article Citation - WoS: 101Citation - Scopus: 104Giant Alloyed Hot Injection Shells Enable Ultralow Optical Gain Threshold in Colloidal Quantum Wells(Amer Chemical Soc, 2019-08-22) Altintas, Yemliha; Gungor, Kivanc; Gao, Yuan; Sak, Mustafa; Quliyeva, Ulviyya; Bappi, Golam; Demir, Hilmi VolkanAs an attractive materials system for high- Record-low optical gain threshold in giant-shell COWs performance optoelectronics, colloidal nanoplatelets (NPLs) benefit from atomic-level precision in thickness, minimizing emission inhomogeneous broadening. Much progress has been made to enhance their photoluminescence quantum yield (PLQY) and photostability. However, to date, layer-by-layer growth of shells at room temperature has resulted in defects that limit PLQY and thus curtail the 0.2 performance of NPLs as an optical gain medium. Here, we introduce a hot-injection method growing giant alloyed shells using an approach that reduces core/shell lattice mismatch and suppresses Auger recombination. Near-unity PLQY is achieved with a narrow full-width-at-half-maximum (20 nm), accompanied by emission tunability (from 610 to 650 nm). The biexciton lifetime exceeds 1 ns, an order of magnitude longer than in conventional colloidal quantum dots (CQDs). Reduced Auger recombination enables record-low amplified spontaneous emission threshold of 2.4 mu J cm(-2) under one-photon pumping. This is lower by a factor of 2.5 than the best previously reported value in nanocrystals (6 /kJ cm(-2) for CdSe/CdS NPLs). Here, we also report single-mode lasing operation with a 0.55 mu J cm(-2) threshold under two-photoexcitation, which is also the best among nanocrystals (compared to 0.76 mu J cm(-2) from CdSe/CdS CQDs in the Fabry-Perot cavity). These findings indicate that hot-injection growth of thick alloyed shells makes ultrahigh performance NPLs.