PubMed İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/397
Browse
193 results
Search Results
Article Disorder-Engineered Hybrid Plasmonic Cavities for Emission Control of Defects in HBN(American Chemical Society, 2026-02-07) Genc, Sinan; Yucel, Oguzhan; Aglarci, Furkan; Rodriguez-Fernandez, Carlos; Yilmaz, Alpay; Caglayan, Humeyra; Bek, AlpanDefect-based quantum emitters in hexagonal boron nitride (hBN) are promising building blocks for scalable quantum photonics due to their stable single-photon emission at room temperature. However, enhancing their emission intensity and controlling the decay dynamics remain significant challenges. This study demonstrates a low-cost, scalable fabrication approach to integrate plasmonic nanocavities with defect-based quantum emitters in hBN nanoflakes. Using the thermal dewetting process, we realize two distinct configurations: stochastic Ag nanoparticles (AgNPs) on hBN flakes and hybrid plasmonic nanocavities formed by AgNPs on top of hBN flakes supported on gold/silicon dioxide (Au/SiO2) substrates. While AgNPs on bare hBN yield up to a 2-fold photoluminescence (PL) enhancement with reduced emitter lifetimes, the hybrid nanocavity architecture provides a dramatic, up to 100-fold PL enhancement and improved uniformity across multiple emitters, all without requiring deterministic positioning. Finite-difference time-domain (FDTD) simulations and time-resolved PL measurements confirm size-dependent control over decay dynamics and cavity-emitter interactions. Our versatile solution overcomes key quantum photonic device development challenges, including material integration, emission intensity optimization, and spectral multiplexity.Article Citation - WoS: 8Citation - Scopus: 8Writing Chemical Patterns Using Electrospun Fibers as Nanoscale Inkpots for Directed Assembly of Colloidal Nanocrystals(Royal Soc Chemistry, 2020) Kiremitler, N. Burak; Torun, Ilker; Altintas, Yemliha; Patarroyo, Javier; Demir, Hilmi Volkan; Puntes, Victor F.; Onses, M. SerdarApplications that range from electronics to biotechnology will greatly benefit from low-cost, scalable and multiplex fabrication of spatially defined arrays of colloidal inorganic nanocrystals. In this work, we present a novel additive patterning approach based on the use of electrospun nanofibers (NFs) as inkpots for end-functional polymers. The localized grafting of end-functional polymers from spatially defined nanofibers results in covalently bound chemical patterns. The main factors that determine the width of the nanopatterns are the diameter of the NF and the extent of spreading during the thermal annealing process. Lowering the surface energy of the substrates via silanization and a proper choice of the grafting conditions enable the fabrication of nanoscale patterns over centimeter length scales. The fabricated patterns of end-grafted polymers serve as the templates for spatially defined assembly of colloidal metal and metal oxide nanocrystals of varying sizes (15 to 100 nm), shapes (spherical, cube, rod), and compositions (Au, Ag, Pt, TiO2), as well as semiconductor quantum dots, including the assembly of semiconductor nanoplatelets.Article Citation - WoS: 24Citation - Scopus: 26Wireless Measurement of Elastic and Plastic Deformation by a Metamaterial-Based Sensor(MDPI, 2014-10-20) Ozbey, Burak; Demir, Hilmi Volkan; Kurc, Ozgur; Erturk, Vakur B.; Altintas, AyhanWe report remote strain and displacement measurement during elastic and plastic deformation using a metamaterial-based wireless and passive sensor. The sensor is made of a comb-like nested split ring resonator (NSRR) probe operating in the near-field of an antenna, which functions as both the transmitter and the receiver. The NSRR probe is fixed on a standard steel reinforcing bar (rebar), and its frequency response is monitored telemetrically by a network analyzer connected to the antenna across the whole stress-strain curve. This wireless measurement includes both the elastic and plastic region deformation together for the first time, where wired technologies, like strain gauges, typically fail to capture. The experiments are further repeated in the presence of a concrete block between the antenna and the probe, and it is shown that the sensing system is capable of functioning through the concrete. The comparison of the wireless sensor measurement with those undertaken using strain gauges and extensometers reveals that the sensor is able to measure both the average strain and the relative displacement on the rebar as a result of the applied force in a considerably accurate way. The performance of the sensor is tested for different types of misalignments that can possibly occur due to the acting force. These results indicate that the metamaterial-based sensor holds great promise for its accurate, robust and wireless measurement of the elastic and plastic deformation of a rebar, providing beneficial information for remote structural health monitoring and post-earthquake damage assessment.Article Citation - WoS: 39Citation - Scopus: 51What Are the Key Success Factors for Strategy Formulation and Implementation? Perspectives of Managers in the Hotel Industry(Elsevier Sci Ltd, 2020-08) Koseoglu, Mehmet Ali; Altin, Mehmet; Chan, Eric; Aladag, Omer FarukThis study investigates how hotel managers describe strategy and identify key success factors for its formulation and implementation. The study analyzes qualitative data collected through semi-structured interviews with property level top managers of hotels in Hong Kong. The findings show that hotel managers prioritize competition analysis and macro-environmental conditions over internal characteristics such as teamwork in strategy formulation. In the implementation phase, however, internal considerations such as employee involvement and strategic consensus are given prominence. This study provides a significant contribution by examining how top level practitioners in the industry interpret success factors in their strategic management efforts, and it highlights a largely neglected area in the hospitality and tourism management literature.Article Citation - WoS: 13Citation - Scopus: 14Unravelling the Moderating Roles of Environmental Regulations on the Impact of Foreign Direct Investment on Environmental Sustainability(Academic Press Ltd- Elsevier Science Ltd, 2025-02) Ehigiamusoe, Kizito Uyi; Chen, Danqing; Dogan, Eyup; Binsaeed, Rima H.In the era of economic globalization, China attracts significant foreign direct investment (FDI) to accelerate economic prosperity. FDI inflows could have ramifications on environmental degradation (ED) despite the enactment of different environmental regulations (ERs) such as market-incentive, command-and-control as well as informal regulations. Though some studies have shown that FDI and ED have significant relationship, the moderating roles of different ERs on the environmental impact of FDI has not been empirically unraveled. This study fills this research gap by analyzing the direct impact of FDI on ED (i.e., carbon dioxide emissions, ecological footprint) using the provincial panel data. Second, it unravels the moderating roles of different ERs on the environmental impact of FDI in the provinces and regions. The results indicate that FDI directly mitigates ED, verifying the pollution halo hypothesis while ERs directly alleviate ED in China. However, the interaction between FDI and ERs do not alleviate ED in China albeit regional heterogeneity exist. The economic implication is that FDI is not a channel through which ERs enhance environmental sustainability in China. This study recommends some policy options arising from the findings.Article Citation - WoS: 16Citation - Scopus: 22Ultrasonic-Assisted Production of Precipitated Calcium Carbonate Particles From Desulfurization Gypsum(Elsevier, 2021-04) Altiner, Mahmut; Top, Soner; Kaymakoglu, BurcinThis study aimed to investigate the effect of ultrasonic application on the production of precipitated calcium carbonate (PCC) particles from desulfurization gypsum via direct mineral carbonation method using conventional and venturi tube reactors in the presence of different alkali sources (NaOH, KOH and NH4OH). The venturi tube was designed to determine the effect of ultrasonication on PCC production. Ultrasonic application was performed three times (before, during, and after PCC production) to evaluate its exact effect on the properties of the PCC particles. Scanning electron microscope (SEM), X-ray diffraction (XRD), Atomic force microscope (AFM), specific surface area (SSA), Fourier transform infrared spectrometry (FTIR), and particle size analyses were performed. Results revealed the strong influence of the reactor types on the nucleation rate of PCC particles. The presence of Na+ or K+ ions in the production resulted in producing PCC particles containing only calcite crystals, while a mixture of vaterite and calcite crystals was observed if NH4+ ions were present. The use of ultrasonic power during PCC production resulted in producing cubic calcite rather than vaterite crystals in the presence of all ions. It was determined that ultrasonic power should be conducted in the venturi tube before PCC production to obtain PCC particles with superior properties (uniform particle size, nanosized crystals, and high SSA value). The resulting PCC particles in this study can be suitably used in paint, paper, and plastic industries according to the ASTM standards.Article Citation - WoS: 12Citation - Scopus: 13Uncovering Membrane-Bound Models of Coagulation Factors by Combined Experimental and Computational Approaches(Georg Thieme verlag Kg, 2021-07-02) Ohkubo, Y. Zenmei; Madsen, Jesper J.In the life sciences, including hemostasis and thrombosis, methods of structural biology have become indispensable tools for shedding light on underlying mechanisms that govern complex biological processes. Advancements of the relatively young field of computational biology have matured to a point where it is increasingly recognized as trustworthy and useful, in part due to their high space-time resolution that is unparalleled by most experimental techniques to date. In concert with biochemical and biophysical approaches, computational studies have therefore proven time and again in recent years to be key assets in building or suggesting structural models for membrane-bound forms of coagulation factors and their supramolecular complexes on membrane surfaces where they are activated. Such endeavors and the proposed models arising from them are of fundamental importance in describing and understanding the molecular basis of hemostasis under both health and disease conditions. We summarize the body of work done in this important area of research to drive forward both experimental and computational studies toward new discoveries and potential future therapeutic strategies.Article Citation - WoS: 23Citation - Scopus: 28Ultra-Rapid Catalytic Degradation of 4-Nitrophenol With Ionic Liquid Recoverable and Reusable Ibuprofen Derived Silver Nanoparticles(Elsevier Sci Ltd, 2018-06) Hassan, Syeda Sara; Carlson, Krista; Mohanty, Swomitra Kumar; Sirajuddin; Canlier, AliThis study reports a one-pot and eco-friendly method for the synthesis of spherical ibuprofen derived silver nanoparticles (IBU-AgNPs) in aqueous media using ibuprofen analgesics drug as capping as well as reducing agent. Formation of AgNPs occurred within a few min (less than 5 min) at room temperature without resorting to any harsh conditions and hazardous organic solvents. Synthesized AgNPs were characterized with common analytical techniques. Transmission electron microscope (TEM) images confirmed the formation of spherical particles having a size distribution in the range of 12.5 +/- 1.5 nm. Employment of IBU analgesic aided the control of better size distribution and prevented agglomeration of particles. Such AgNPs solution was highly stable for more than two months when stored at ambient temperature. The IBU-AgNPs solution showed excellent ultra-rapid catalytic activity for the complete degradation of toxic 4-nitrophenol (4-NPh) into non-toxic 4-aminophenol (4-APh) within 40 s. AgNPs were recovered with the help of water insoluble-room temperature ionic liquid and reused with enhanced catalytic potential. This method provides a novel, rapid and economical alternative for the treatment of toxic organic pollutants to maintain water quality and environmental safety against water pollution. It is extendable for the control of other reducible contaminants in water as well. Furthermore, this catalytic activity for an effective degradation of organic toxins is expected to play a crucial role for achieving the Sustainable Development Goal 6 set by United Nations. (C) 2017 Elsevier Ltd. All rights reserved.Article Citation - WoS: 11Citation - Scopus: 10UV Light Promoted Dihydrolipoic Acid and Its Alanine Derivative Directed Rapid Synthesis of Stable Gold Nanoparticles and Their Catalytic Activity(Nature Portfolio, 2024-10-21) Temur, Nimet; Dadi, Seyma; Nisari, Mustafa; Ucuncuoglu, Neslihan; Avan, Ilker; Ocsoy, IsmailIn general, colloidal gold nanoparticles (AuNPs) have been synthesized in heated or boiling water containing HAuCl4 precursor with sodium citrate as reducing stabilizing reagent. Although temperature plays a driving for synthesis of AuNPs, elevated temperature in thermal reduction method causes aggregation of the AuNPs. The preferential, rapid and strong binding of dihydro-lipoic acid and its derivatives on surface of AuNPs via thiol - Au chemistry promote the production of very stable AuNPs. In this study, we have developed citric acid (CA), dihydrolipoic acid (DHLA) and DHLA-Alanine (DHLA-Ala) directed rapid synthesis of ultra-stable AuNPs, DHLA@AuNPs and DHLA-Ala@AuNPs, under the UV (311 nm) irradiation at room temperature (RT: 25 degrees C) in around 10 min (min). CA is used as a potential reducing agent to expedite both reduction of Au3+ ion and AuNP formation, DHLA and DHLA-Ala act as stabilizing agents by replacing CA molecules on surface of AuNPs in order to produce quite stable AuNP. It is worthy to mention that reduction of Au3+ ion, formation and surface stabilization of AuNPs are consequently occurred in one step. We also investigated how experimental parameters including reaction time and temperature, pH of reaction solution, affect formation of the AuNPs. The effects of salt concentration and storage temperature were studied to show stability of the AuNPs. The synthesized DHLA@AuNPs and DHLA-Alanine@AuNPs were characterized via UV-Vis spectrophotometer (UV-Vis), scanning transmission electron microscope (STEM), dynamic light scattering (DLS) and Zeta potential (ZT) devices. The reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) was efficiently catalyzed by the AuNPs in the presence of sodium borohydride in aqueous solution.Article Citation - WoS: 13Citation - Scopus: 13Tuning the Shades of Red Emission in InP/ZnSe Nanocrystals With Narrow Full Width for Fabrication of Light-Emitting Diodes(Amer Chemical Soc, 2023-10-13) Soheyli, Ehsan; Bicer, Aysenur; Ozel, Sultan Suleyman; Tiras, Kevser Sahin; Mutlugun, Evren; Sahin Tiras, KevserWhile Cd-based luminescent nanocrystals (NCs) are the most mature NCs for fabricating efficient red light-emitting diodes (LEDs), their toxicity related limitation is inevitable, making it necessary to find a promising alternative. From this point of view, multishell-coated, red-emissive InP-based NCs are excellent luminescent nanomaterials for use as an emissive layer in electroluminescent (EL) devices. However, due to the presence of oxidation states, they suffer from a wide emission spectrum, which limits their performance. This study uses tris-(dimethyl-amino)-phosphine (3DMA-P) as a low-cost aminophosphine precursor and a double HF treatment to suggest an upscaled, cost-effective, and one-pot hot-injection synthesis of purely red-emissive InP-based NCs. The InP core structures were coated with thick layers of ZnSe and ZnS shells to prevent charge delocalization and to create a narrow size distribution. The purified NCs showed an intense emission signal as narrow as 43 nm across the entire red wavelength range (626-670 nm) with an emission quantum efficiency of 74% at 632 nm. The purified samples also showed an emission quantum efficiency of 60% for far-red wavelengths of 670 nm with a narrow full width of 50 nm. The samples showed a relatively long average emission lifetime of 50-70 ns with a biexponential decay profile. To demonstrate the practical ability of the prepared NCs in optoelectronics, we fabricated a red-emissive InP-based LEDs. The best-performing device showed an external quantum efficiency (EQE) of 1.16%, a luminance of 1039 cd m(-2), and a current efficiency of 0.88 cd A(-1).