PubMed İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12573/397
Browse
13 results
Search Results
Article Citation - WoS: 19Citation - Scopus: 19Understanding and Tailoring Excited State Properties in Solution-Processable Oligo(p-Phenyleneethynylene)s: Highly Fluorescent Hybridized Local and Charge Transfer Character via Experiment and Theory(Amer Chemical Soc, 2021-10-13) Usta, Hakan; Cosut, Bunyemin; Alkan, FahriRod-shaped oligo(p-phenyleneethynylene) (OPE) offers an attractive p-framework for the development of solution-processable highly fluorescent molecules having tunable hybridized local and charge transfer (HLCT) excited states and (reverse) intersystem crossing ((R)ISC) channels. Herein, an HLCT oligo(p-phenyleneethynylene) library was studied for the first time in the literature in detail systematically via experiment and theory. The design, synthesis, and full characterization of a new highly fluorescent (Phi(PL-solution) similar to 1) sky blue emissive 4',4 ''-((2,5-bis((2-ethylhexyl)oxy)-1,4-phenylene)bis(ethyne-2,1-diyl))bis(N,N-diphenyl-[1,1'-bi-phenyl]-4-amine) (2EHO-TPA-PE) was also reported. The new molecule consists of a D'-Ar-pi-D-pi-Ar-D' molecular architecture with an extended pi-spacer and no acceptor unit, and detailed structural, physicochemical, single-crystal, and optoelectronic characterizations were performed. A high solid-state quantum efficiency (Phi(PL-solution) similar to 0.8) was achieved as a result of suppressed exciton-phonon/vibronic couplings (no pi-pi interactions and multiple (14 per dimeric form) strong C-H center dot center dot center dot pi interactions). Strong solution-phase/solid-state dipole-dependent tunable excited state behavior (local excited (LE) -> HLCT -> charge transfer (CT)) and decay dynamics covering a wide spectral region were demonstrated, and the CT state was observed to be highly fluorescent despite extremely large Stokes shift (similar to 130 nm)/fwhm (similar to 125 nm) and significant charge separation (0.75 charge.nm). Employing the Lippert-Mataga model, along with detailed photophysical studies and TDDFT calculations, key relationships between molecular design-electronic structure-exciton characteristics were elucidated with regards to HLCT and hot exciton channel formations. The interstate coupling between CT and LE states and the interplay of this coupling with respect to medium polarity were explored. A key relationship between excited-state symmetry breaking process and the formation of HLCT state was discussed for TPA-ended rod-shaped OPE p-systems. (R)ISC-related delayed fluorescence (tau similar to 2-6 ns) processes were evident following the prompt decays (similar to 0.4-0.9 ns) both in the solution and in the solid-state. As a unique observation, the delayed fluorescence could be tuned and facilitated via small dielectric changes in the medium. Our results and the molecular engineering perspectives presented in this study may provide unique insights into the structural and electronic factors governing tunable excited state and hot-exciton channel formations in OPEs for (un)conventional solution-processed luminescence applications.Article Citation - WoS: 4Citation - Scopus: 4Transparent Films Made of Highly Scattering Particles(Amer Chemical Soc, 2020-01-13) Erdem, Talha; Yang, Lan; Xu, Peicheng; Altintas, Yemliha; O'Neil, Thomas; Caciagli, Alessio; Eiser, ErikaToday, colloids are widely employed in various products from creams and coatings to electronics. The ability to control their chemical, optical, or electronic features by controlling their size and shape explains why these materials are so widely preferred. Nevertheless, altering some of these properties may also lead to some undesired side effects, one of which is an increase in optical scattering upon concentration. Here, we address this strong scattering issue in films made of binary colloidal suspensions. In particular, we focus on raspberry-type polymeric particles made of a spherical polystyrene core decorated by small hemispherical domains of acrylate with an overall positive charge, which display an unusual stability against aggregation in aqueous solutions. Their solid films display a brilliant red color due to Bragg scattering but appear completely white on account of strong scattering otherwise. To suppress the scattering and induce transparency, we prepared films by hybridizing them with oppositely charged PS particles with a size similar to that of the bumps on the raspberries. We report that the smaller PS particles prevent raspberry particle aggregation in solid films and suppress scattering by decreasing the spatial variation of the refractive index inside the film. We believe that the results presented here provide a simple strategy to suppress strong scattering of larger particles to be used in optical coatings.Article Citation - WoS: 28Citation - Scopus: 29Three-Dimensional Au-Coated Electrosprayed Nanostructured BODIPY Films on Aluminum Foil as Surface-Enhanced Raman Scattering Platforms and Their Catalytic Applications(Amer Chemical Soc, 2017-05-16) Yilmaz, Mehmet; Erkartal, Mustafa; Ozdemir, Mehmet; Sen, Unal; Usta, Hakan; Demirel, GokhanThe design and development of three-dimensional (3D) nanostructures with high surface-enhanced Raman scattering (SERS) performances have attracted considerable attention in the fields of chemistry, biology, and materials science. Nevertheless, electrospraying of organic smalt molecules on low-cost flexible substrates has never been studied to realize large-scale SERS-active platforms. Here, we report the facile, efficient, and low-cost fabrication of-Stable and reproducible Au-coated electrosprayed organic semiconductor films (Au@BDY-4TEBDY) on flexible regular aluminum foil at a large scale (5 cm X 5 cm) for practical SERS and catalytic applications. To this end, a well-designed-acceptor-donor-atceptor-type solution-processable molecular semiconductor, BDY-4T-BDY, developed by our group, is used because of its advantageous structural and electrical properties. The morphology of the electrosprayed organic film changes by solution concentration, and two different 3D morphologies with out-of-plane features are obtained. Highly uniform dendritic nanoribbons with sharp needle-like tips and vertically oriented nanoplates (similar to 50 nm thickness) are achieved when electrospraying solution concentrations of 240 and 253% w/v.(mgimL) are, respectively, used. When these electrosprayed organic films are coated with a nanoscopic thin (30 nm) Au layer, the resulting Au@BDY-4T-BDY platforms demonstrate remarkable SERS enhancement factors up to 1.7 X 10(6) with excellent Raman signal reproducibility (relative standard deviation <= 0.13) for methylene blue over the entire film. Finally, Au@BDY-4T-BDY films showed good catalytic activity for the reduction of 4-nitrophenol to 4-aminophenol with rate constants of 1.3 X 10(-2) and 9.2 X 10(-3) min(-1). Our results suggest that electrospraying of rationally designed organic semiconductor molecules on flexible substrates holds great promise to enable low-cost, solution-processed, SERS-active platforms.Article Citation - WoS: 61Citation - Scopus: 74Solution-Processable Bodipy-Based Small Molecules for Semiconducting Microfibers in Organic Thin-Film Transistors(Amer Chemical Soc, 2016-05-23) Ozdemir, Mehmet; Choi, Donghee; Kwon, Guhyun; Zorlu, Yunus; Cosut, Bunyemin; Kim, Hyekyoung; Usta, HakanElectron-deficient pi-conjugated small molecules can function as electron-transporting semiconductors in various optoelectronic applications. Despite their unique structural, optical, and electronic properties, the development of BODIPY-based organic semiconductors has lagged behind that of other pi-deficient units. Here, we report the design and synthesis of two novel solution-proccessable BODIPY-based small molecules (BDY-3T-BDY and BDY-4T-BDY) for organic thin-film transistors (OTFTs). The new semiconductors were fully characterized by H-1/C-13 NMR, mass spectrometry, cyclic voltammetry, UV-vis spectroscopy, photoluminescence, differential scanning calorimetry, and thermogravimetric analysis. The single-crystal X-ray diffraction (XRD) characterization of a key intermediate reveals crucial structural properties. Solution-sheared top-contact/bottom-gate OTFTs exhibited electron mobilities up to 0.01 cm(2)/V center dot s and current on/off ratios of >10(8). Film microstructural and morphological characterizations indicate the formation of relatively long (similar to 0.1 mm) and micrometer-sized (1-2 mu m) crystalline fibers for BDY-4T-BDY-based films along the shearing direction. Fiber-alignment-induced charge-transport anisotropy (mu?/mu approximate to 10) was observed, and higher mobilities were achieved when the microfibers were aligned along the conduction channel, which allows for efficient long-range charge-transport between source and drain electrodes. These OTFT performances are the highest reported to date for a BODIPY-based molecular semiconductor, and demonstrate that BODIPY is a promising building block for enabling solution-processed, electron-transporting semiconductor films.Article Citation - WoS: 54Citation - Scopus: 58Proton Conducting Self-Assembled Metal-Organic Framework/Polyelectrolyte Hollow Hybrid Nanostructures(Amer Chemical Soc, 2016-08-29) Sen, Unal; Erkartal, Mustafa; Kung, Chung-Wei; Ramani, Vijay; Hupp, Joseph T.; Farha, Omar K.Herein, a room temperature chemical process to synthesize functional, hollow nanostructures from zeolitic imidazolate framework-8 (ZIF-8) and poly(vinylphosphonic acid) (PVPA) is reported. Syntheses are initiated by physically blending the components a process that is accompanied first by encapsulation of ZIF-8 crystallites by PVPA and then by fragmentation of the crystallites. The fragmentation process is driven by partial displacement of the methyl-imidazolate ligands of Zn(II) in ZIF-8 by phosphonate groups on PVPA. Differences in rates of diffusion for the components of the reactive mixture yield a Kirkendall-like effect that is expressed as a hollow-particle morphology. The obtained hollow nanostructures feature hybrid shells containing PVPA, ZIF-8, and their cross-reacted products. The hybrid structures display substantial proton conductivities that increase with increasing temperature, even under the anhydrous conditions prevailing at temperatures above the boiling point of water. For example, at T = 413 K the proton conductivity of ZIF-8@PVPA reaches 3.2 (+/- 0.12) x 10(-3) S cm(-1), a value comparatively higher than that for PVPA (or ZIF-8) in isolation. The high value may reflect the availability in the hybrid structures of free (and partially free), amphoteric imidazole species, and their hydrogen-bonding interactions with phosphonate and/or phosphonic acid units. The persistence of ample conductivity at high temperature reflects the elimination of phosphonic acid group dehydration and dimerization-an effect that strikingly degrades the conductivity of pure PVPA under anhydrous conditions.Article Citation - WoS: 1Citation - Scopus: 1Osmotic-Pressure Nematic Ordering in Suspensions of Laponite and Carboxy Methyl Cellulose(Amer Chemical Soc, 2020-10-12) Xu, Peicheng; Yazici, Ahmet F.; Erdem, Talha; Lekkerkerker, Henk N. W.; Mutlugun, Evren; Eiser, ErikaLaponite is a synthetic clay that is known to form gels in aqueous suspensions at low concentrations (0.01 g/cm(3)) Although it is expected to form lyotropic liquid crystals, such phases usually do not form, as a consequence of laponite's tendency to form gels at concentrations below the threshold for liquid crystal formation. Here we show that macroscopic, birefringent phases of laponite can be prepared through osmotic compression of a laponite solution by an aqueous solution of carboxy methyl cellulose (CMC). We present polarization imaging studies showing how the initially dilute, isotropic laponite phase shrinks while developing typical birefringence colors between crossed polarizers. Using the MichelLevy interference charts, we were able to extract the refractive index and orientation of the laponite nanodisks in the compressed region. Our observations allow us to propose a tentative state diagram, indicating the concentration regions for which we obtain optically anisotropic gels.Article Citation - WoS: 67Citation - Scopus: 74Highly Transparent Au-Coated Ag Nanowire Transparent Electrode With Reduction in Haze(Amer Chemical Soc, 2014-08-07) Kim, Taegeon; Canlier, Ali; Cho, Changsoon; Rozyyev, Vepa; Lee, Jung-Yong; Han, Seung MinAg nanowire transparent electrode has excellent transmittance and sheet resistance, yet its optical haze still needs to be improved in order for it to be suitable for display applications. Ag nanowires are known to have high haze because of the geometry of the nanowire and the high light scattering characteristic of the Ag. In this study, a Au-coated Ag nanowire structure was proposed to reduce the haze, where a thin layer of Au was coated on the surface of the Ag nanowires using a mild [Au(en)(2)]Cl-3 galvanic displacement reaction. The mild galvanic exchange allowed for a thin layer of Au coating on the Ag nanowires with minimal truncation of the nanowire, where the average length and the diameter were 13.0 mu m and 60 nm, respectively. The Au-coated Ag nanowires were suspended in methanol and then electrostatically sprayed on a flexible polycarbonate substrate that revealed a clear reduction in haze with a 2-4% increase in total transmittance, sheet resistance ranges of 80-90%, and 8.8-36.8 Ohm/sq. Finite difference time domain simulations were conducted for Au-coated Ag nanowires that indicated a significant reduction in the average scattering from 1 to 0.69 fo Au layer thicknesses of 0-10 nm.Article Citation - WoS: 63Citation - Scopus: 63Highly Efficient Deep-Blue Electroluminescence Based on a Solution-Processable A-Π Oligo(p-Phenyleneethynylene) Small Molecule(Amer Chemical Soc, 2019-10-14) Usta, Hakan; Alimli, Dilek; Ozdemir, Resul; Dabak, Salih; Zorlu, Yunus; Alkan, Fahri; Can, AyseThe development of solution-processable fluorescent small molecules with highly efficient deep-blue electroluminescence is of growing interest for organic light-emitting diode (OLED) applications. However, high-performance deep-blue fluorescent emitters with external quantum efficiencies (EQEs) over 5% are still scarce in OLEDs. Herein, a novel highly soluble oligo(p-phenyleneethynylene)-based small molecule, 1,4-bis((2-cyanophenyl)ethynyl)-2,5-bis(2-ethylhexyloxy)benzene (2EHO-CNPE), is designed, synthesized, and fully characterized as a wide band gap (2.98 eV) and highly fluorescent (Phi(PL) = 0.90 (solution) and 0.51 (solid-state)) deep-blue emitter. The new molecule is functionalized with cyano (-CN)/2-ethylhexyloxy (-OCH2CH(C2H5)C4H9) electron-withdrawing/-donating substituents, and ethynylene is used as a pi-spacer to form an acceptor (A)-pi-donor (D)-pi-acceptor (A) molecular architecture with hybridized local and charge transfer (HLCT) excited states. Physicochemical and optoelectronic characterizations of the new emitter were performed in detail, and the single-crystal structure was determined. The new molecule adopts a nearly coplanar pi-conjugated framework packed via intermolecular "C-H center dot center dot center dot pi" and "C-H center dot center dot center dot N" hydrogen bonding interactions without any pi-pi stacking. The OLED device based on 2EHO-CNPE shows an EQE(max) of 7.06% (EQE = 6.30% at 200 cd/m(2)) and a maximum current efficiency (CEmax) of 5.91 cd/A (CE = 5.34 cd/A at 200 cd/m(2)) with a deep-blue emission at CIE of (0.15, 0.09). The electroluminescence performances achieved here are among the highest reported to date for a solution-processed deep-blue fluorescent small molecule, and, to the best of our knowledge, it is the first time that a deep-blue OLED is reported based on the oligo(p-phenyleneethynylene) pi-framework. TDDFT calculations point to facile reverse intersystem crossing (RISC) processes in 2EHO-CNPE from high-lying triplet states to the first singlet excited state (T-2/T-3 -> S-1) (hot-exciton channels) that enable a high radiative exciton yield (eta(r) similar to 69%) breaking the theoretical limit of 25% in conventional fluorescent OLEDs. These results demonstrate that properly designed fluorescent oligo(p-phenyleneethynylenes) can be a key player in high-performance deep-blue OLEDs.Article Citation - WoS: 101Citation - Scopus: 104Giant Alloyed Hot Injection Shells Enable Ultralow Optical Gain Threshold in Colloidal Quantum Wells(Amer Chemical Soc, 2019-08-22) Altintas, Yemliha; Gungor, Kivanc; Gao, Yuan; Sak, Mustafa; Quliyeva, Ulviyya; Bappi, Golam; Demir, Hilmi VolkanAs an attractive materials system for high- Record-low optical gain threshold in giant-shell COWs performance optoelectronics, colloidal nanoplatelets (NPLs) benefit from atomic-level precision in thickness, minimizing emission inhomogeneous broadening. Much progress has been made to enhance their photoluminescence quantum yield (PLQY) and photostability. However, to date, layer-by-layer growth of shells at room temperature has resulted in defects that limit PLQY and thus curtail the 0.2 performance of NPLs as an optical gain medium. Here, we introduce a hot-injection method growing giant alloyed shells using an approach that reduces core/shell lattice mismatch and suppresses Auger recombination. Near-unity PLQY is achieved with a narrow full-width-at-half-maximum (20 nm), accompanied by emission tunability (from 610 to 650 nm). The biexciton lifetime exceeds 1 ns, an order of magnitude longer than in conventional colloidal quantum dots (CQDs). Reduced Auger recombination enables record-low amplified spontaneous emission threshold of 2.4 mu J cm(-2) under one-photon pumping. This is lower by a factor of 2.5 than the best previously reported value in nanocrystals (6 /kJ cm(-2) for CdSe/CdS NPLs). Here, we also report single-mode lasing operation with a 0.55 mu J cm(-2) threshold under two-photoexcitation, which is also the best among nanocrystals (compared to 0.76 mu J cm(-2) from CdSe/CdS CQDs in the Fabry-Perot cavity). These findings indicate that hot-injection growth of thick alloyed shells makes ultrahigh performance NPLs.Article Citation - WoS: 7Citation - Scopus: 8Enhancing the Properties of Yttria-Stabilized Zirconia Composites With Zeolitic Imidazolate Framework-Derived Nanocarbons(Amer Chemical Soc, 2023-12-09) Cakan, Niyaz; Issa, Abduselam Abubeker; Alsalman, Hamza; Aliyev, Emin; Duden, Enes Ibrahim; Gurcan Bayrak, Kubra; Sen, UnalCeramic matrix composites (CMCs) reinforced with nanocarbon have attracted significant interest due to their potential to enhance mechanical, thermal, and electrical properties. Although the investigation of carbon-based materials such as graphene and carbon nanotubes as additives for advanced ceramics has been widespread, the utilization of metal-organic framework (MOF)-derived nanocarbons in CMCs remains largely unexplored. We extended our previous proof-of-concept investigations by demonstrating the effectiveness of a different type of MOF-derived carbon as a reinforcing phase in an alternative ceramic matrix. We employed spark plasma sintering (SPS) to consolidate yttria-stabilized zirconia (YSZ) and zeolitic imidazolate framework (ZIF-67) powder blends at 1300 degrees C and a uniaxial pressure of 50 MPa. YSZ serves as the ceramic matrix, whereas ZIF-67 serves as the nanocarbon source. The composite exhibits a highly significant improvement in fracture toughness with an increase of up to 13% compared to that of the YSZ monolith. The formation of ZIF-derived nanocarbon interlayers is responsible for the observed enhancement in ductility, which can be attributed to their ability to facilitate energy dissipation during crack propagation and inhibit grain growth. Furthermore, the room-temperature electrical conductivity of the sintered samples demonstrates a substantial improvement, primarily due to the in situ formation of nanocarbon-based fillers, reaching an impressive 27 S/m with 10 wt % ZIF-67 content. Based on the results, it can be inferred that the incorporation of in situ MOF-derived nanocarbons into CMCs leads to a substantial improvement in both the mechanical and electrical properties.