Browsing by Author "Ozdemir, Mehmet"

Now showing 1 - 17 of 17

Ambipolar small molecular semiconductor-based heterojunction diode
(ELSEVIER SCIENCE SAPO BOX 564, 1001 LAUSANNE, SWITZERLAND, 2016) Ocaya, R. O.; Ozdemir, Mehmet; Ozdemir, Resul; Al-Ghamdi, Ahmed; Usta, Hakan; Farooq, W. A.; Yakuphanoglu, F.; AGÜ, Mühendislik Fakültesi, Malzeme Bilimi ve Nanoteknoloji Mühendisliği Bölümü; Ozdemir, Mehmet; Ozdemir, Resul
A heterojunction diode based on an ambipolar organic semiconductor 2,8-bis(5-(2-octyldodecyl)thien-2-yl)indeno[1,2-b]fluorene-6,12-dione (20D-TIFDKT) was fabricated on p-Si using a drop-casting technique. The current-voltage and capacitance-voltage characteristics of Al/20D-TIFDKT/p-Si/Al devices with aluminized contacts were investigated under dark and 100 mW/cm(2) illumination intensity. The result is a novel interface-state controlled diode device that is shown to be rectifying. In the forward, bias it has a current that depends on the illumination intensity at constant bias, showing potential application in low-power solar cell application. In the reverse bias, it has a response that depends on the illumination intensity regardless of the applied reverse bias. This suggests a potential use as a sensor in photoconductive applications. Between 0 and 0.7 V forward bias, the ideality factor, series resistance and barrier height average at 2.35, 67.6 k Omega and 0.842 eV, respectively, regardless of illumination. (C) 2016 Elsevier B.V. All rights reserved.
The design and fabrication of supramolecular semiconductor nanowires formed by benzothienobenzothiophene (BTBT)-conjugated peptides
(Royal Society of Chemistry, 2018) Khalily, Mohammad Aref; Usta, Hakan; Ozdemir, Mehmet; Bakan, Gokhan; Dikecoglu, F.Begum; Gayle, Charlotte Edwards; Hutchinson, Jessica A.; Hamley, Ian W.; Dana, Aykutlu; Guler, Mustafa O.; AGÜ, Mühendislik Fakültesi, Malzeme Bilimi ve Nanoteknoloji Mühendisliği Bölümü;
?-Conjugated small molecules based on a [1]benzothieno[3,2-b]benzothiophene (BTBT) unit are of great research interest in the development of solution-processable semiconducting materials owing to their excellent charge-transport characteristics. However, the BTBT ?-core has yet to be demonstrated in the form of electro-active one-dimensional (1D) nanowires that are self-assembled in aqueous media for potential use in bioelectronics and tissue engineering. Here we report the design, synthesis, and self-assembly of benzothienobenzothiophene (BTBT)–peptide conjugates, the BTBT–peptide (BTBT-C3–COHN-Ahx-VVAGKK-Am) and the C8-BTBT–peptide (C8-BTBT-C3–COHN-Ahx-VVAGKK-Am), as ß-sheet forming amphiphilic molecules, which self-assemble into highly uniform nanofibers in water with diameters of 11–13(±1) nm and micron-size lengths. Spectroscopic characterization studies demonstrate the J-type ?–? interactions among the BTBT molecules within the hydrophobic core of the self-assembled nanofibers yielding an electrical conductivity as high as 6.0 × 10-6 S cm-1. The BTBT ?-core is demonstrated, for the first time, in the formation of self-assembled peptide 1D nanostructures in aqueous media for potential use in tissue engineering, bioelectronics and (opto)electronics. The conductivity achieved here is one of the highest reported to date in a non-doped state.
Design, synthesis, and characterization of alpha,omega-disubstituted indeno[1,2-b]fluorene-6,12-dione-thiophene molecular semiconductors. Enhancement of ambipolar charge transport through synthetic tailoring of alkyl substituents
(ROYAL SOC CHEMISTRYTHOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND, 2016) Ozdemir, Mehmet; Choi, Donghee; Kwon, Guhyun; Zorlu, Yunus; Kim, Hyekyoung; Kim, Myung-Gil; Seo, SungYong; Sen, Unal; Citir, Murat; Kim, Choongik; Usta, Hakan; 0000-0002-0618-1979; AGÜ, Mühendislik Fakültesi, Malzeme Bilimi ve Nanoteknoloji Mühendisliği Bölümü; Usta, Hakan; Ozdemir, Mehmet; Sen, Unal
A series of indeno[1,2-b]fluorene-6,12-dione-thiophene derivatives with hydrocarbon substituents at alpha,omega-positions as side groups have been designed and synthesized. The new compounds were fully characterized by H-1/C-13 NMR, mass spectrometry, cyclic voltammetry, UV-vis absorption spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and melting point measurements. The solid state structure of the indeno[1,2-b]fluorene-6,12-dione acceptor core has been identified based on single-crystal X-ray diffraction (XRD). The structural and electronic properties were also studied using density functional theory calculations, which were found to be in excellent agreement with the experimental findings and provided further insight. The detailed effects of alkyl chain size and orientation on the optoelectronic properties, intermolecular cohesive forces, thin-film microstructures, and charge transport performance of the new semiconductors were investigated. Two of the new solution-processable semiconductors, 2EH-TIFDKT and 2OD-TIFDKT, were deposited as thin-films via solution-shearing, drop-casting, and droplet-pinned crystallization methods, and their morphologies and microstructures were investigated by X-ray diffraction (XRD) and atomic force microscopy (AFM). The solution-processed thin-film transistors based on 2EH-TIFDKT and 2OD-TIFDKT showed ambipolar device operations with electron and hole mobilities as high as 0.12 cm(2) V-1 s(-1) and 0.02 cm(2) V-1 s(-1), respectively, with Ion/Ioff ratios of 105 to 106. Here, we demonstrate that rational repositioning of the b-substituents to molecular termini greatly benefits the p-core planarity while maintaining a good solubility, and results in favorable structural and optoelectronic characteristics for more efficient charge-transport in the solid-state. The ambipolar charge carrier mobilities were increased by two-three orders of magnitude in the new indeno[1,2-b]fluorene-6,12-dione-thiophene core on account of the rational side-chain engineering.
Electrochemical polymerization of ambipolar carbonyl-functionalized indenofluorene with memristive properties
(ELSEVIER, RADARWEG 29, 1043 NX AMSTERDAM, NETHERLANDS, 2019) Figa, Viviana; Usta, Hakan; Macaluso, Roberto; Salzner, Ulrike; Ozdemir, Mehmet; Kulyk, Bohdan; Krupka, Oksana; Bruno, Maurizio; 0000-0002-0618-1979; 0000-0001-5581-2557; AGÜ, Mühendislik Fakültesi, Malzeme Bilimi ve Nanoteknoloji Mühendisliği Bölümü
Carbonyl-functionalized indenofluorene was electropolymerized with a high faradaic efficiency of 85% and the solid state properties of the resulting polymeric thin films were investigated. They displayed modular optical properties depending on their oxidation state. The approach used for inorganic semiconductors was applied to polyindeonofluorene derivative. Mott-Schottky analysis evidenced a switching from p-type to n-type electrical conduction, suggesting an ambipolar behaviour of the polymer. As an application, flexible organic memristors were fabricated and resistive switching properties were observed.
Frequency and electric field controllable photodevice: FYTRONIX device
(ELSEVIERRADARWEG 29, 1043 NX AMSTERDAM, NETHERLANDS, 2017) Tataroglu, A.; Al-Sehemi, Abdullah G.; Ozdemir, Mehmet; Ozdemir, Resul; Usta, Hakan; Al-Ghamdi, Ahmed A.; Farooq, W. A.; Yakuphanoglu, F.; AGÜ, Mühendislik Fakültesi, Malzeme Bilimi ve Nanoteknoloji Mühendisliği Bölümü; Ozdemir, Mehmet; Ozdemir, Resul; Usta, Hakan
Al/p-Si/BODIPY/Al diode was fabricated by forming BODIPY organic layer on p-Si having ohmic contact. The electrical and photoresponse properties of the prepared diode were investigated in detail. The current-voltage ( I-V) measurements were performed under dark and various illumination intensities. It is observed that the photocurrent under illumination is higher than the dark current. The transient measurements indicate that the device exhibits both photodiode and photocapacitor behavior. We called this device as FYTRONIX device. The photoresponse behavior of the FYTRONIX device is controlled simultaneously by frequency and electric field. The FYRONIX device can be used as a photoresponse sensor in optoelectronic applications.
Logarithmic organic photodetectors
(ELSEVIER, 2015) Elgazzar, Elsayed; Ozdemir, Mehmet; Usta, Hakan; Al-Ghamdi, Ahmed A.; DERE, Ayşegül; El-Tantawy, Farid; Yakuphanoglu, F.; 0000-0001-5790-2943; 0000-0002-0618-1979; AGÜ, Mühendislik Fakültesi, Malzeme Bilimi ve Nanoteknoloji Mühendisliği Bölümü; Ozdemir, Mehmet; Usta, Hakan
A novel photodetector of Al/GO:C8-BTBT/n-Si/Au with various graphene oxide (GO) contents has been investigated. The electrical properties of the diodes were characterized by current–voltage (I–V) and capacitance–voltage (C–V) measurements. The values of barrier height, ideality factor, and series resistance of the diodes were determined from I–V characteristic curves by using Norde’s equations. The photocurrent properties of the diode were studied under various illumination intensities. The photoconducting mechanism of the diodes is controlled by the traps. The photoresponse properties of the diodes are increased with GO contents. The obtained results indicate that graphene oxide doped 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene/n-Si heterojunctions can be used as a photodetector for optoelectronic applications.
Mesoscale Morphologies of Nafion-Based Blend Membranes by Dissipative Particle Dynamics
(MDPIST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2021) Sen, Unal; Ozdemir, Mehmet; Erkartal, Mustafa; Kaya, Alaattin Metin; Manda, Abdullah A.; Oveisi, Ali Reza; Ali Aboudzadeh, M.; Tokumasu, Takashi; 0000-0002-1940-8749; AGÜ, Mühendislik Fakültesi, Malzeme Bilimi ve Nanoteknoloji Mühendisliği Bölümü; Kaya, Alaattin Metin
Polymer electrolyte membrane (PEM) composed of polymer or polymer blend is a vital element in PEM fuel cell that allows proton transport and serves as a barrier between fuel and oxygen. Understanding the microscopic phase behavior in polymer blends is very crucial to design alternative cost-effective proton-conducting materials. In this study, the mesoscale morphologies of Nafion/poly(1-vinyl-1,2,4-triazole) (Nafion-PVTri) and Nafion/poly(vinyl phosphonic acid) (Nafion-PVPA) blend membranes were studied by dissipative particle dynamics (DPD) simulation technique. Simulation results indicate that both blend membranes can form a phase-separated microstructure due to the different hydrophobic and hydrophilic character of different polymer chains and different segments in the same polymer chain. There is a strong, attractive interaction between the phosphonic acid and sulfonic acid groups and a very strong repulsive interaction between the fluorinated and phosphonic acid groups in the Nafion-PVPA blend membrane. By increasing the PVPA content in the blend membrane, the PVPA clusters' size gradually increases and forms a continuous phase. On the other hand, repulsive interaction between fluorinated and triazole units in the Nafion-PVTri blend is not very strong compared to the Nafion-PVPA blend, which results in different phase behavior in Nafion-PVTri blend membrane. This relatively lower repulsive interaction causes Nafion-PVTri blend membrane to have non-continuous phases regardless of the composition.
Micro-/Nanostructured Highly Crystalline Organic Semiconductor Films for Surface-Enhanced Raman Spectroscopy Applications
(WILEY-V C H VERLAG GMBH, 2015) Yilmaz, Mehmet; Ozdemir, Mehmet; Erdogan, Hakan; Tamer, Ugur; Sen, Unal; Facchetti, Antonio; Usta, Hakan; Demirel, Gokhan; 0000-0003-3736-5049; 0000-0002-0618-1979; 0000-0001-5790-2943; AGÜ, Mühendislik Fakültesi, Malzeme Bilimi ve Nanoteknoloji Mühendisliği Bölümü; Ozdemir, Mehmet; Usta, Hakan; Sen, Unal
The utilization of inorganic semiconductors for surface-enhanced Raman spectroscopy (SERS) has attracted enormous interest. However, despite the technological relevance of organic semiconductors for enabling inexpensive, large-area, and flexible devices via solution processing techniques, these p-conjugated systems have never been investigated for SERS applications. Here for the first time, a simple and versatile approach is demonstrated for the fabrication of novel SERS platforms based on micro-/nanostructured 2,7-dioctyl[1]benzothieno[3,2-b][1] benzothiophene (C8-BTBT) thin films via an oblique-angle vapor deposition. The morphology of C8-BTBT thin films is manipulated by varying the deposition angle, thus achieving highly favorable 3D vertically aligned ribbon-like micro-/nanostructures for a 90 degrees deposition angle. By combining C8-BTBT semiconductor films with a nanoscopic thin Au layer, remarkable SERS responses are achieved in terms of enhancement (approximate to 10(8)), stability (>90 d), and reproducibility (RSD < 0.14), indicating the great promise of Au/C8-BTBT films as SERS platforms. Our results demonstrate the first example of an organic semiconductor-based SERS platform with excellent detection characteristics, indicating that p-conjugated organic semiconductors have a great potential for SERS applications.
Nanostructured organic semiconductor films for molecular detection with surface-enhanced Raman spectroscopy
(NATURE RESEARCHHEIDELBERGER PLATZ 3, BERLIN 14197, GERMANY, 2017) Yilmaz, Mehmet; Babur, Esra; Ozdemir, Mehmet; Gieseking, Rebecca L.; Dede, Yavuz; Tamer, Ugur; Schatz, George C.; Facchetti, Antonio; Usta, Hakan; Demirel, Gokhan; 0000-0002-0618-1979; 0000-0001-5790-2943; AGÜ, Mühendislik Fakültesi, Malzeme Bilimi ve Nanoteknoloji Mühendisliği Bölümü; Ozdemir, Mehmet; Usta, Hakan
pi-Conjugated organic semiconductors have been explored in several optoelectronic devices, yet their use in molecular detection as surface-enhanced Raman spectroscopy (SERS)-active platforms is unknown. Herein, we demonstrate that SERS-active, superhydrophobic and ivy-like nanostructured films of a molecular semiconductor, alpha,omega-diperfluorohexylquaterthiophene (DFH-4T), can be easily fabricated by vapour deposition. DFH-4T films without any additional plasmonic layer exhibit unprecedented Raman signal enhancements up to 3.4 x 10(3) for the probe molecule methylene blue. The combination of quantum mechanical computations, comparative experiments with a fluorocarbon-free alpha,omega-dihexylquaterthiophene (DH-4T), and thin-film microstructural analysis demonstrates the fundamental roles of the pi-conjugated core fluorocarbon substitution and the unique DFH-4T film morphology governing the SERS response. Furthermore, Raman signal enhancements up to similar to 10(10) and sub-zeptomole (< 10(-21) mole) analyte detection were accomplished by coating the DFH-4T films with a thin gold layer. Our results offer important guidance for the molecular design of SERS-active organic semiconductors and easily fabricable SERS platforms for ultrasensitive trace analysis.
A new rod-shaped BODIPY-acetylene molecule for solution-processed semiconducting microribbons in n-channel organic field-effect transistors
(ROYAL SOC CHEMISTRYTHOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND, 2017) Ozdemir, Mehmet; Choi, Donghee; Zorlu, Yunus; Cosut, Bunyemin; Kim, Hyungsug; Kim, Choongik; Usta, Hakan; AGÜ, Mühendislik Fakültesi, Malzeme Bilimi ve Nanoteknoloji Mühendisliği Bölümü; Usta, Hakan; Ozdemir, Mehmet
BODIPY-based pi-conjugated small molecules have been extensively studied in various fields of sensing and biochemical labelling; however, their use in organic optoelectronic applications is very limited. A new solution-processable acceptor-donor-acceptor (A-D-A) type small molecule, BDY-PhAc-BDY, consisting of BODIPY pi-acceptors and a rod-shaped 1,4-bis-(thienylethynyl) 2,5-dialkoxybenzene pi-donor, has been synthesized and fully characterized as a novel n-channel semiconductor in bottom-gate/top-contact organic field-effect transistors (OFETs). The new semiconductor exhibits an electrochemical band gap of 2.12 eV with highly stabilized HOMO/LUMO energy levels of -5.68 eV/-3.56 eV. Single-crystal X-ray diffraction (XRD) analysis of BDY-PhAc-BDY reveals a relatively low "BODIPY-meso-thiophene" dihedral angle (theta = 44.94 degrees), antiparallel pi-stacked BODIPY dimers with an interplanar distance of 3.93 angstrom, and strong "C-H center dot center dot center dot pi (2.85 angstrom)" interactions. The OFET devices fabricated by solution processing show the formation of highly-crystalline, one-dimensional (1-D) microribbons, which results in clear n-channel semiconductivity with an electron mobility of 0.004 cm(2) V-1 s(-1) and an on/off current ratio of 10(5)-10(6). To date, this is the highest reported for BODIPY-based small molecular semiconductors with alkyne linkages. Our results clearly demonstrate that BODIPY is an effective pi-acceptor unit for the design of solution-processable, electron-transporting organic semiconductors and easily fabricable 1-D semiconductor micro-/nano-structures for fundamental/applied research in organic optoelectronics.
Semiconducting Copolymers Based on meso-Substituted BODIPY for Inverted Organic Solar Cells and Field-Effect Transistors
(Advanced Electronic Materials, 2018) Ozdemir, Mehmet; Kim, Sang Woo; Kim, Hyungsug; Kim, Myung-Gil; Kim, Bumjoon J.; Kim, Choongik; Usta, Hakan; AGÜ, Mühendislik Fakültesi, Malzeme Bilimi ve Nanoteknoloji Mühendisliği Bölümü;
The synthesis, physicochemical, and optoelectronic properties of a new class of low band-gap (?1.3 eV) donor–acceptor copolymers based on a highly electron-deficient meso-5-(2-octyldodecyl)thiophene-substituted BODIPY ?-unit are presented. The polymeric solutions exhibit strong aggregation-dependent excitonic properties indicating the presence of enhanced ?-coherence as a result of strong interchain interactions. The polymeric semiconductor thin films prepared by spin coating show isotropic nodule-like grains with essentially no ordering in the out-of-plane direction. Field-effect hole mobilities of 0.005 cm2 V-1·s-1 are observed in bottom-gate top-contact organic field-effect transistors, and inverted bulk-heterojunction organic photovoltaics employing the polymer:PC71BM active layer exhibit excellent power conversion efficiencies of 6.2% with a short-circuit current of 16.6 mA cm-2. As far as it is known, this is a record high value achieved to date for a boron-containing donor polymer in the photovoltaic literature indicating a significant enhancement in power conversion efficiency (>3–4 times). The findings clearly present that rationally designed BODIPY-based donor–acceptor copolymers can be a key player in photovoltaic applications.
Solution-Processable BODIPY-Based Small Molecules for Semiconducting Microfibers in Organic Thin-Film Transistors
(AMER CHEMICAL SOC1155 16TH ST, NW, WASHINGTON, DC 20036, 2016) Ozdemir, Mehmet; Choi, Donghee; Kwon, Guhyun; Zorlu, Yunus; Cosut, Bunyemin; Kim, Hyekyoung; Facchetti, Antonio; Kim, Choongik; Usta, Hakan; 0000-0002-0618-1979; AGÜ, Mühendislik Fakültesi, Malzeme Bilimi ve Nanoteknoloji Mühendisliği Bölümü; Ozdemir, Mehmet; Usta, Hakan
Electron-deficient pi-conjugated small molecules can function as electron-transporting semiconductors in various optoelectronic applications. Despite their unique structural, optical, and electronic properties, the development of BODIPY-based organic semiconductors has lagged behind that of other pi-deficient units. Here, we report the design and synthesis of two novel solution-proccessable BODIPY-based small molecules (BDY-3T-BDY and BDY-4T-BDY) for organic thin-film transistors (OTFTs). The new semiconductors were fully characterized by H-1/C-13 NMR, mass spectrometry, cyclic voltammetry, UV-vis spectroscopy, photoluminescence, differential scanning calorimetry, and thermogravimetric analysis. The single-crystal X-ray diffraction (XRD) characterization of a key intermediate reveals crucial structural properties. Solution-sheared top-contact/bottom-gate OTFTs exhibited electron mobilities up to 0.01 cm(2)/V center dot s and current on/off ratios of >10(8). Film microstructural and morphological characterizations indicate the formation of relatively long (similar to 0.1 mm) and micrometer-sized (1-2 mu m) crystalline fibers for BDY-4T-BDY-based films along the shearing direction. Fiber-alignment-induced charge-transport anisotropy (mu?/mu approximate to 10) was observed, and higher mobilities were achieved when the microfibers were aligned along the conduction channel, which allows for efficient long-range charge-transport between source and drain electrodes. These OTFT performances are the highest reported to date for a BODIPY-based molecular semiconductor, and demonstrate that BODIPY is a promising building block for enabling solution-processed, electron-transporting semiconductor films.
A Solution-Processable Liquid-Crystalline Semiconductor for Low-Temperature-Annealed Air-Stable N-Channel Field-Effect Transistors
(WILEY-V C H VERLAG GMBHPOSTFACH 101161, 69451 WEINHEIM, GERMANY, 2017) Ozdemir, Resul; Choi, Donghee; Ozdemir, Mehmet; Kim, Hyekyoung; Kostakoglu, Sinem Tuncel; Erkartal, Mustafa; Kim, Hyungsug; Kim, Choongik; Usta, Hakan; AGÜ, Mühendislik Fakültesi, Malzeme Bilimi ve Nanoteknoloji Mühendisliği Bölümü; Ozdemir, Resul; Ozdemir, Mehmet; Erkartal, Mustafa; Usta, Hakan
A new solution-processable and air-stable liquid-crystalline nchannel organic semiconductor (2,2'-(2,8-bis(5-(2-octyldodecyl) thiophen-2-yl) indeno[1,2-b] fluorene-6,12-diylidene) dimalononitrile, alpha,omega-2OD-TIFDMT) with donor-acceptor-donor (D-AD) pi conjugation has been designed, synthesized, and fully characterized. The new semiconductor exhibits a low LUMO energy (-4.19 eV) and a narrow optical bandgap (1.35 eV). The typical pseudo-focal-conic fan-shaped texture of a hexagonal columnar liquid-crystalline (LC) phase was observed over a wide temperature range. The spin-coated semiconductor thin films show the formation of large (approximate to 0.5-1 mu m) and highly crystalline platelike grains with edge-on molecular orientations. Low-temperature-annealed (50 degrees C) top-contact/bottom-gate OFETs have provided good electron obility values as high as 0.11 cm(2) (Vs)(-1) and high I-on/I-off ratios of 10(7) to 10(8) with excellent ambient stability. This indicates an enhancement of two orders of magnitude (100 V) when compared with the b-substituted parent semiconductor, beta-DD-TIFDMT (2,2'-(2,8-bis(3-dodecylthiophen- 2-yl) indeno[1,2-b] fluorene-6,12-diylidene) dimalononitrile). The current rational alkyl-chain engineering route offers great advantages for D-A-D pi-core coplanarity in addition to maintaining good solubility in organic solvents, and leads to favorable optoelectronic/physicochemical characteristics. These remarkable findings demonstrate that alpha,omega-2OD-TIFDMT is a promising semiconductor material for the development of n-channel OFETs on flexible plastic substrates and LC-state annealing of the columnar liquid crystals can lower the electron mobility for transistor-type charge transport.
A Solution-Processable meso-Phenyl-BODIPY-Based n-Channel Semiconductor with Enhanced Fluorescence Emission
(WILEY-V C H VERLAG GMBH, POSTFACH 101161, 69451 WEINHEIM, GERMANY, 2019) Ozcan, Emrah; Ozdemir, Mehmet; Ho, Dongil; Zorlu, Yunus; Ozdemir, Resul; Kim, Choongik; Usta, Hakan; Cosut, Bunyemin; 0000-0002-0618-1979; 0000-0002-7957-110X; 0000-0001-6530-0205; 0000-0001-6325-5674; 0000-0003-2811-1872; AGÜ, Mühendislik Fakültesi, Malzeme Bilimi ve Nanoteknoloji Mühendisliği Bölümü
The cover feature shows the delicate balance between locally excited (LE) and twisted intramolecular charge-transfer (TICT) states, which could be controlled by solvent polarity and nano-aggregation, of a meso-phenyl-BODIPY-based fluorescent semiconductor. The dihedral angle between the meso-aromatic unit and BODIPY pi-core was found to be the key factor in this balance. This is the first report of highly emissive characteristics for an A-D-A type BODIPY-based n-channel semiconductor. Details are given in the Full Paper by B. Cosut, H. Usta, C. Kim, and co-workers (DOI: 10.1002/cplu.201900317).
Three-Dimensional Au-Coated Electrosprayed Nanostructured BODIPY Films on Aluminum Foil as Surface-Enhanced Raman Scattering Platforms and Their Catalytic Applications
(AMER CHEMICAL SOC1155 16TH ST, NW, WASHINGTON, DC 20036, 2017) Yilmaz, Mehme; Erkartal, Mustafa; Ozdemir, Mehmet; Sen, Unal; Usta, Hakan; Demirel, Gokhan; AGÜ, Mühendislik Fakültesi, Malzeme Bilimi ve Nanoteknoloji Mühendisliği Bölümü; Erkartal, Mustafa; Ozdemir, Mehmet; Usta, Hakan
The design and development of three-dimensional (3D) nanostructures with high surface-enhanced Raman scattering (SERS) performances have attracted considerable attention in the fields of chemistry, biology, and materials science. Nevertheless, electrospraying of organic smalt molecules on low-cost flexible substrates has never been studied to realize large-scale SERS-active platforms. Here, we report the facile, efficient, and low-cost fabrication of-Stable and reproducible Au-coated electrosprayed organic semiconductor films (Au@BDY-4TEBDY) on flexible regular aluminum foil at a large scale (5 cm X 5 cm) for practical SERS and catalytic applications. To this end, a well-designed-acceptor-donor-atceptor-type solution-processable molecular semiconductor, BDY-4T-BDY, developed by our group, is used because of its advantageous structural and electrical properties. The morphology of the electrosprayed organic film changes by solution concentration, and two different 3D morphologies with out-of-plane features are obtained. Highly uniform dendritic nanoribbons with sharp needle-like tips and vertically oriented nanoplates (similar to 50 nm thickness) are achieved when electrospraying solution concentrations of 240 and 253% w/v.(mgimL) are, respectively, used. When these electrosprayed organic films are coated with a nanoscopic thin (30 nm) Au layer, the resulting Au@BDY-4T-BDY platforms demonstrate remarkable SERS enhancement factors up to 1.7 X 10(6) with excellent Raman signal reproducibility (relative standard deviation <= 0.13) for methylene blue over the entire film. Finally, Au@BDY-4T-BDY films showed good catalytic activity for the reduction of 4-nitrophenol to 4-aminophenol with rate constants of 1.3 X 10(-2) and 9.2 X 10(-3) min(-1). Our results suggest that electrospraying of rationally designed organic semiconductor molecules on flexible substrates holds great promise to enable low-cost, solution-processed, SERS-active platforms.
Trans-cis isomerization assisted synthesis of solution-processable yellow fluorescent maleic anhydrides for white-light generation
(ELSEVIER, 2015) Ozdemir, Mehmet; Genc, Sinan; Ozdemir, Resul; Altintas, Yemliha; Citir, Murat; Sen, Unal; Mutlugun, Evren; Usta, Hakan; 0000-0003-3736-5049; 0000-0002-6909-723X; 0000-0002-0618-1979; 0000-0002-7957-110X; 0000-0002-6666-4980; 0000-0001-5790-2943; 0000-0003-3715-5594; AGÜ, Mühendislik Fakültesi, Malzeme Bilimi ve Nanoteknoloji Mühendisliği Bölümü; Ozdemir, Mehmet; Genc, Sinan; Ozdemir, Resul; Altintas, Yemliha; Citir, Murat; Sen, Unal; Mutlugun, Evren; Usta, Hakan
Heterocyclic maleic anhydride derivatives have been extensively studied in natural products chemistry over the past few decades. However, their incorporation into optoelectronic devices has lagged behind that of other pi-conjugated systems, and they have never been studied in white light emitting diodes (WLEDs). The development of emissive pi-conjugated materials for (WLEDs) has been an emerging scientific and technological research area to replace phosphors used in LED-based solid-state lighting. Here, we demonstrate the design, synthesis and characterization of two new highly emissive alkyl-substituted bis(thienyl)maleic anhydrides (C6-Th2MA and C12-Th2MA) with favorable photophysical properties. The new core is synthesized via a novel trans-to-cis isomerization-assisted one-pot reaction, which is demonstrated for the first time in the literature for the synthesis of a bis(heteroaryl)maleic anhydride. Due to its favorable absorption and fluorescence properties in the blue and yellow region of the visible spectrum, respectively, C12-Th2MA is studied as a potential wavelength-upconverting material. A WLED fabricated by drop-casting a polymeric solution of C12-Th2MA on a blue LED (InGaN, 455 nm) yields promising CIE coordinates and color-rendering index (CRI) values of (0.24, 0.20) and 65.0, respectively. Considering the simplicity of the current molecular structure and facile synthesis, alkyl-substituted bis(thienyl)maleic anhydrides stand as ideal phosphor alternatives. Therefore, the current findings may open new perspectives for the development of maleic anhydride-based small molecules for low-cost, energy-efficient, and solution-processed lighting technologies. (C) 2015 Elsevier B.V. All rights reserved.
Ultralow bandgap molecular semiconductors for ambient-stable and solution-processable ambipolar organic field-effect transistors and inverters By
(ROYAL SOC CHEMISTRYTHOMAS GRAHAM HOUSE, SCIENCE PARK, MILTON RD, CAMBRIDGE CB4 0WF, CAMBS, ENGLAND, 2017) Ozdemir, Resul; Choi, Donghee; Ozdemir, Mehmet; Kwon, Guhyun; Kim, Hyekyoung; Sen, Unal; Kim, Choongik; Usta, Hakan; AGÜ, Mühendislik Fakültesi, Malzeme Bilimi ve Nanoteknoloji Mühendisliği Bölümü
The design and development of novel ambipolar semiconductors is very crucial to advance various optoelectronic technologies including organic complementary (CMOS) integrated circuits. Although numerous high-performance ambipolar polymers have been realized to date, small molecules have been unable to provide high ambipolar performance in combination with ambient-stability and solution-processibility. In this study, by implementing highly p-electron deficient, ladder-type IFDK/IFDM acceptor cores with bithiophene donor units in D-A-D pi-architectures, two novel small molecules, 2OD-TTIFDK and 2OD-TTIFDM, were designed, synthesized and characterized in order to achieve ultralow band-gap (1.21-1.65 eV) semiconductors with sufficiently balanced molecular energetics for ambipolarity. The HOMO/LUMO energies of the new semiconductors are found to be -5.47/-3.61 and -5.49/-4.23 eV, respectively. Bottom-gate/top-contact OFETs fabricated via solution-shearing of 2OD-TTIFDM yield perfectly ambient stable ambipolar devices with reasonably balanced electron and hole mobilities of 0.13 cm(2) V-1 s(-1) and 0.01 cm(2) V-1 s(-1), respectively with I-on/I-off ratios of similar to 10(3)-10(4), and 2OD-TTIFDK-based OFETs exhibit ambipolarity under vacuum with highly balanced (mu(e)/mu(h) similar to 2) electron and hole mobilities of 0.02 cm(2) V-1 s(-1) and 0.01 cm(2) V-1 s(-1), respectively with I-on/I-off ratios of similar to 10(5)-10(6). Furthermore, complementary-like inverter circuits were demonstrated with the current ambipolar semiconductors resulting in high voltage gains of up to 80. Our findings clearly indicate that ambient-stability of ambipolar semiconductors is a function of molecular orbital energetics without being directly related to a bulk p-backbone structure. To the best of our knowledge, considering the processing, charge-transport and inverter characteristics, the current semiconductors stand out among the best performing ambipolar small molecules in the OFET and CMOS-like circuit literature. Our results provide an efficient approach in designing ultralow band-gap ambipolar small molecules with good solution-processibility and ambient-stability for various optoelectronic technologies, including CMOS-like integrated circuits.