Browsing by Author "Cabalar, Ali Firat"
Now showing 1 - 3 of 3
- Results Per Page
- Sort Options
Article Citation - WoS: 27Citation - Scopus: 30A Comparative Study on the Vs30 and N30 Based Seismic Site Classification in Kahramanmaras, Turkey(Wiley, 2020) Naji, Dalia Munaff; Akin, Muge K.; Cabalar, Ali FiratAssessment of seismic site classification (SSC) using either the average shear wave velocity (V-S30) or the average SPT-N values (N-30) for upper 30 m in soils is the simplest method to carry out various studies including site response and soil-structure interactions. Either the V-S30- or the N-30-based SSC maps designed according to the National Earthquake Hazards Reduction Program (NEHRP) classification system are effectively used to predict possible locations for future seismic events. The main goal of this study is to generate maps using the Geographic Information System (GIS) for the SSC in Kahramanmaras city, influenced by both East Anatolian Fault and Dead Sea Fault Zones, using both V-S30 and N-30 values. The study also presents a series of GIS maps produced using the shear wave velocity (V-S) and SPT-N values at the depths of 5 m, 10 m, 15 m, 20 m, and 25 m. Furthermore, the study estimates the bed rock level and generates the SSC maps for the average V-S values through overburden soils by using the NEHRP system. The V-S30 maps categorize the study area mainly under class C and limited number of areas under classes B and D, whereas the N-30 maps classify the study area mainly under class D. Both maps indicate that the soil classes in the study area are different to a high extent. Eventually, the GIS maps complied for the purpose of urban development may be utilized effectively by engineers in the field.Article Citation - WoS: 15Citation - Scopus: 18Evaluation of Seismic Site Classification for Kahramanmaras City, Turkey(Springer, 2021) Naji, Dalia Munaff; Akin, Muge K.; Cabalar, Ali FiratThis paper presents a study on the seismic site classification map using the geophysical tests in Kahramanmaras city located at a place where African, Anatolian, and Arabian plates meeting in southern-central Turkey. Generating seismic site classification maps in accordance with National Earthquake Hazards Reduction Program (NEHRP) has become a more significant criterion for earthquake hazard estimations. The SPT-N values obtained from the field studies at 287 boreholes within the upper 30 m were used to describe the subsurface conditions in the region. The shear wave velocity (V-S) values in the study area were obtained by implementing Multichannel Analysis of Surface Waves (MASW) and Microtremor Array Method (MAM) measurements tests. An approach proposed by Boore (Boore, Bull Seismol Soc Am 94:591-597, 2004) for the cases where the V-S measurements do not reach 30 m depth has also been adopted by correlating the shallow shear wave velocity with V-S30. The resulting site classification maps estimate that the study area is predominantly classified as soil site class C, while the small areas were rarely classified as soil site class D and B. Furthermore, a systematic analysis based on a comparative study of the present research and the published correlations for seismic site classification with V-S30 values has been carried out using Geographical Information System (GIS). Evidently, the V-S30 based seismic site classification maps could be effectively used by researchers and engineers for the purpose of land-use planning and urban development in earthquake-prone regions.Article Seismic Site Classification via Vs30 and SPT-N Values in Antakya City, Türkiye(Taylor & Francis Ltd, 2026) Alosman, Salama Omar; Akin, Muge K.; Cabalar, Ali FiratThe paper presents an assessment for the seismic site classification (SSC) in Antakya city located in southern central T & uuml;rkiye, strongly affected by three destructive earthquakes of 7.7 Mw took place in Pazarcik (Kahramanmaras) on February 6, 2023, 7.6 Mw took place in Elbistan (Kahramanmaras) on February 6, 2023, and 6.4 Mw took place in Defne (Hatay) on February 20, 2023. The V-S30 and SPT-N values have been used to identify the SSC in the region with respect to the provisions recommended by the National Earthquake Hazards Reduction Program (NEHRP), Design of Structures for Earthquake Resistance (Eurocode 8), and Turkish Building Earthquake Code (TBEC). The values of SPT-N were recorded from the field works that include 630 boreholes in the top 30 m, whilst the V-S30 was calculated through the multichannel analysis of surface waves (MASW) method performed at 977 different locations across the region. The results showed that approximately 51% and 44% of soils in the city of Antakya has been classified as Class C and Class D, respectively, in accordance with the NEHRP and TBEC, whilst 52% and 44% of the same region has been classified as Class B and Class C, respectively, in accordance with the Eurocode 8. Furthermore, a newly proposed correlation as well as already available ones between the V-S30 and SPT-N values have been presented comparatively by an extensive series of GIS maps produced in order to have a much clear understanding on the various soil types in Antakya. Evidently, the results of this research should be of a great significance for researchers and practitioners working on the earthquake-resistant structures, prediction of ground movements, and in seismic risk assessments.

